[Scilab-Dev] Scilab/SCIAO
Simon GARESTE
simon.gareste at scilab-enterprises.com
Fri Mar 8 17:25:19 CET 2013
Hi,
Get the source package, containing the builder.sce. Try to find where
the "MSDOS" are, and replace them by
getos() == "Windows"
the "~MSDOS" have to be replaced by
getos() <> "Windows"
then re-execute the builder, then the loader.
Simon
On 03/08/2013 04:59 PM, Luis Acevedo wrote:
>
> Hello Simon
>
> Finally I have got the program up and running with Scilab 4.0 windows
> version.
>
> The error occurs with Scilab version greater than 4.0. I do not know
> how to solve the MS error for the latest versions. I do not have too
> much time to develop any code right now , I am busy with thesis.
>
> Prob, I can have a look the binary sources and see what I can do in a
> near furure.
>
> If you like to help me to understand the problem I can send you a shot
> of the error with the latest Scilab. Is it ok?
>
> This is exact message with Scilab 5.4
>
> if ~MSDOS then
>
> !--error 4
>
> Undefined variable: MSDOS
>
> at line 214 of exec file called by :
>
> exec("C:\PROGRA~1\SCILAB~1.0\contrib\SciAO\\loader.sce");
>
> in execstr instruction called by :
>
> 137d:13d4ab7e025:-7fa3");execstr(toolboxes(1));if exists("%oldgcbo")
> then gcbo = %oldgcbo; el
>
> while executing a callback
>
> I am new in ATMOS , I am learning what to do.
>
> Thanks a lot for your explanations and help
>
> Luis
>
> *From:*dev-bounces at lists.scilab.org
> [mailto:dev-bounces at lists.scilab.org] *On Behalf Of *Simon GARESTE
> *Sent:* 08 March 2013 15:47
> *To:* List dedicated to development questions
> *Subject:* Re: [Scilab-Dev] Scilab/SCIAO
>
> Hi,
>
> about the
>
> I have requested Scilab 4.0 but it comes in linux and I can not get the
> windows version. Probably some else have the windows XP version and pass to
> me.
>
> you already had your response in a separate way: you asked for
> sources, and received sources. You now have the binary windows version.
> About the sciAO: you submitted to ATOMS the binary of the module,
> packaged by the developer I'm assuming. This is clearly not the
> correct way to do. ATOMS is there to have modules respecting the
> toolbox_skeleton architecture, so that we can try and compile them,
> and upload binary version afterwards if it works.
> What you can do to make it work is download the ATOMS part ( here
> <http://sourceforge.net/projects/sciao/files/sciao/source/>), then
> make it look a little more like the toolbox_skeleton (present in your
> scilab directory, and following recommendations here
> <http://wiki.scilab.org/ATOMS> and there
> <http://wiki.scilab.org/Guidelines%20To%20Design%20a%20Module>) and
> try to execute, into scilab, the builder file, then the loader file if
> the builder worked.
> We will certainly have a hard time helping you if the info you give is
> "it gives a MS error". Could you please develop? What error is it? How
> did you install it?
>
> Simon
>
> On 03/08/2013 02:24 PM, luisacevedo wrote:
>
> Hello All
>
>
>
> I have found a very useful Optical tool, link as follows
>
> http://sciao.sourceforge.net/#authors
>
> When you install it under SCilab 5.4 32 or 64 bits , it gives a MS error and
>
> the library does not appear in XCOS.
>
>
>
> Please is there anyone to try out this and give me some directions?
>
>
>
> I have requested Scilab 4.0 but it comes in linux and I can not get the
>
> windows version. Probably some else have the windows XP version and pass to
>
> me.
>
>
>
> Thanks
>
> Waiting for your replies
>
>
>
> Luis
>
>
>
>
>
>
>
> --
>
> View this message in context:http://mailinglists.scilab.org/Scilab-SCIAO-tp4026183.html
>
> Sent from the Scilab developers - Mailing Lists Archives mailing list archive at Nabble.com.
>
> _______________________________________________
>
> dev mailing list
>
> dev at lists.scilab.org <mailto:dev at lists.scilab.org>
>
> http://lists.scilab.org/mailman/listinfo/dev
>
>
>
> --
> Simon Gareste
> Support & Development Engineer
> -----------------------------------------------------------
> Scilab Enterprises
> 143bis rue Yves Le Coz - 78000 Versailles, France
> Phone: +33.1.80.77.04.70
> http://www.scilab-enterprises.com
>
> ------------------------------------------------------------------------
>
> Sunday Times Scottish University of the Year 2011-2013
> Top in the UK for student experience
> Fourth university in the UK and top in Scotland (National Student
> Survey 2012)
>
> We invite research leaders and ambitious early career researchers to
> join us in leading and driving research in key inter-disciplinary
> themes. Please see www.hw.ac.uk/researchleaders for further
> information and how to apply.
>
> Heriot-Watt University is a Scottish charity registered under charity
> number SC000278.
>
>
> _______________________________________________
> dev mailing list
> dev at lists.scilab.org
> http://lists.scilab.org/mailman/listinfo/dev
--
Simon Gareste
Support & Development Engineer
-----------------------------------------------------------
Scilab Enterprises
143bis rue Yves Le Coz - 78000 Versailles, France
Phone: +33.1.80.77.04.70
http://www.scilab-enterprises.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.scilab.org/pipermail/dev/attachments/20130308/2993b042/attachment.htm>
More information about the dev
mailing list