[Scilab-Dev] [Scilab-users] Issue on Scilab Compilation on Raspbery Pi
Stéphane Mottelet
stephane.mottelet at utc.fr
Thu May 7 14:44:33 CEST 2020
Hi,
Le 07/05/2020 à 14:29, Chin Luh Tan a écrit :
> Hi Stephane,
>
> I applied the patch Change17530
> <https://antispam.utc.fr/proxy/2/c3RlcGhhbmUubW90dGVsZXRAdXRjLmZy/codereview.scilab.org/17530> but
> not the Change21438
> <https://antispam.utc.fr/proxy/2/c3RlcGhhbmUubW90dGVsZXRAdXRjLmZy/codereview.scilab.org/21438>,
> as the original configure.ac still searching for Jogl 2.2.
>
> I tried the path set 5 and 8 from changes 17530, both compile the
> scilab with minor modification on the fop (to enable detection).
>
> As I am trying to compile in Arm environment, I have to install the
> 3rd parties from apt-get, and with those libs installed, "configure"
> was able to "pass" for the make.
>
> i think the issue is on the jogl now? The parts which differentiate
> 2.2. and 2.3 were mentioned in the configure.ac:
>
> AC_JAVA_CHECK_JAR([jogl2],[javax.media.opengl.glu.GLUnurbs],[Scilab 3D
> rendering - Version 2.0], [], [], [2.2])
> AC_JAVA_CHECK_JAR([jogl2],[jogamp.opengl.x11.glx.GLX],[Scilab 3D
> rendering - Version 2.3], [], [], 2.3)
>
On the source point of view, 2.3 version changed all class headers, but
there are surely may other changes in the implementation.
> AC_JAVA_CHECK_JAR([gluegen2-rt],[jogamp.common.os.MachineDescriptionRuntime],[Scilab
> 3D rendering])
> AC_JAVA_CHECK_JAR([gluegen2-rt],[com.jogamp.common.os.Platform],[Scilab
> 3D rendering])
>
> Should I use the Jogl2.2 for the compilation and use the original
> configure.ac?
I think so. Just to test that the problem still occurs (or not) with 2.2.
S.
>
> Thanks.
>
> Regards,
> Chin Luh
>
>
>
>
> ---- On Thu, 07 May 2020 01:42:51 +0800 *Stéphane Mottelet
> <stephane.mottelet at utc.fr>* wrote ----
>
> If you apply the JoGL patch then third parties have to be updated
> as well. I think you did it. But since this patch is not needed
> for Linux, I would try to compile with previous version.
>
> S.
>
> Le 6 mai 2020 à 18:52, Chin Luh Tan
> <chinluh.tan at bytecode-asia.com
> <mailto:chinluh.tan at bytecode-asia.com>> a écrit :
>
>
> sorry pls ignore the previous incomplete email which has been
> accidentally sent:
>
> I tried to compile scilab 6.1 under raspberry pi 4, and the
> compilation completed with scilab lauched with following messages:
>
>
> Caught handled GLException: EGLGLXDrawableFactory - Could
> not initialize shared resources for EGLGraphicsDevice[type
> .egl, v1.4.0, connection :0.0, unitID 0, handle
> 0xffffffffa8b148f0, owner true, ResourceToolkitLock[obj
> 0xb29daf, isOwner true, <1fa6506, f15db4>[count 1, qsz 0,
> owner <main-SharedResourceRunner>]]] on thread
> main-SharedResourceRunner
> [0]:
> jogamp.opengl.egl.EGLDrawableFactory$SharedResourceImplementation.createSharedResource(EGLDrawableFactory.java:518)
> [1]:
> jogamp.opengl.SharedResourceRunner.run(SharedResourceRunner.java:353)
> [2]: java.lang.Thread.run(Thread.java:748)
> Caused[0] by NoSuchMethodError:
> java.nio.IntBuffer.rewind()Ljava/nio/IntBuffer; on thread
> main-SharedResourceRunner
> [0]:
> com.jogamp.common.nio.Buffers.newDirectIntBuffer(Buffers.java:146)
> [1]:
> com.jogamp.common.nio.Buffers.newDirectIntBuffer(Buffers.java:150)
> [2]:
> com.jogamp.common.nio.Buffers.newDirectIntBuffer(Buffers.java:154)
> [3]:
> jogamp.opengl.egl.EGLGraphicsConfiguration.EGLConfig2Capabilities(EGLGraphicsConfiguration.java:221)
> [4]:
> jogamp.opengl.egl.EGLGraphicsConfigurationFactory.eglConfigs2GLCaps(EGLGraphicsConfigurationFactory.java:481)
> [5]:
> jogamp.opengl.egl.EGLDrawableFactory.getAvailableEGLConfigs(EGLDrawableFactory.java:962)
> [6]:
> jogamp.opengl.egl.EGLDrawableFactory.access$800(EGLDrawableFactory.java:88)
> [7]:
> jogamp.opengl.egl.EGLDrawableFactory$SharedResourceImplementation.mapAvailableEGLESConfig(EGLDrawableFactory.java:679)
> [8]:
> jogamp.opengl.egl.EGLDrawableFactory$SharedResourceImplementation.createEGLSharedResourceImpl(EGLDrawableFactory.java:613)
> [9]:
> jogamp.opengl.egl.EGLDrawableFactory$SharedResourceImplementation.createSharedResource(EGLDrawableFactory.java:516)
> [10]:
> jogamp.opengl.SharedResourceRunner.run(SharedResourceRunner.java:353)
> [11]: java.lang.Thread.run(Thread.java:748)
> Caught handled GLException: X11GLXDrawableFactory - Could
> not initialize shared resources for X11GraphicsDevice[type
> .x11, connection :0.0, unitID 0, handle 0x0, owner false,
> ResourceToolkitLock[obj 0x1f4f0f8, isOwner false,
> <1c08638, 40f0>[count 0, qsz 0, owner <NULL>]]] on thread
> main-SharedResourceRunner
> [0]:
> jogamp.opengl.x11.glx.X11GLXDrawableFactory$SharedResourceImplementation.createSharedResource(X11GLXDrawableFactory.java:306)
> [1]:
> jogamp.opengl.SharedResourceRunner.run(SharedResourceRunner.java:353)
> [2]: java.lang.Thread.run(Thread.java:748)
>
>
> while I am still able to launch the Scilab and perform most
> operation, however, when I tried to plot a figure, i get:
>
>
> java.lang.reflect.InvocationTargetException
> at
> java.awt.EventQueue.invokeAndWait(EventQueue.java:1349)
> at
> java.awt.EventQueue.invokeAndWait(EventQueue.java:1324)
> at
> javax.swing.SwingUtilities.invokeAndWait(SwingUtilities.java:1353)
> at
> org.scilab.modules.gui.SwingView.updateObject(Unknown Source)
> at
> org.scilab.modules.graphic_objects.graphicController.GraphicController$2.run(Unknown
> Source)
> at
> org.scilab.modules.graphic_objects.graphicController.GraphicController.objectUpdate(Unknown
> Source)
> at
> org.scilab.modules.graphic_objects.graphicController.GraphicController.setGraphicObjectRelationship(Unknown
> Source)
> at
> org.scilab.modules.graphic_objects.builder.Builder.cloneAxesModel(Unknown
> Source)
> at
> org.scilab.modules.graphic_objects.builder.Builder.createNewFigureWithAxes(Unknown
> Source)
> Caused by: com.jogamp.opengl.GLException: Profile
> GL_DEFAULT is not available on X11GraphicsDevice[type
> .x11, connection :0.0, unitID 0, handle 0x0, owner false,
> ResourceToolkitLock[obj 0x1f4f0f8, isOwner false,
> <1c08638, 40f0>[count 0, qsz 0, owner <NULL>]]], but: []
> at com.jogamp.opengl.GLProfile.get(GLProfile.java:991)
> at
> com.jogamp.opengl.GLProfile.getDefault(GLProfile.java:722)
> at
> com.jogamp.opengl.awt.GLJPanel.<init>(GLJPanel.java:363)
> at
> com.jogamp.opengl.awt.GLJPanel.<init>(GLJPanel.java:337)
> at
> com.jogamp.opengl.awt.GLJPanel.<init>(GLJPanel.java:325)
> at
> org.scilab.modules.gui.bridge.canvas.SwingScilabCanvasImpl$SafeGLJPanel.<init>(Unknown
> Source)
> at
> org.scilab.modules.gui.bridge.canvas.SwingScilabCanvasImpl$SafeGLJPanel.<init>(Unknown
> Source)
> at
> org.scilab.modules.gui.bridge.canvas.SwingScilabCanvasImpl.createOpenGLComponent(Unknown
> Source)
>
> .
> Any suggestion what I need to change for the compilation?
>
> I compile scilab with:
> 1. gcc, g++, gfortran v 8, and also another try on v9
> 2. openjdk-8-jdk
> 3. Tried Raspbian, Ubuntu for Pi 18.04 , same issue.
> 4. Applied jogl 2.3.2 patch.
>
> Thanks.
>
> Rgds,
> CL
>
>
>
>
>
>
> ---- On Thu, 07 May 2020 00:45:23 +0800 *Chin Luh Tan
> <chinluh.tan at bytecode-asia.com
> <mailto:chinluh.tan at bytecode-asia.com>>* wrote ----
>
> Hi,
>
> I tried to compile scilab 6.1 under raspberry pi 4, and
> the compilation completed with scilab lauched with
> following messages:
>
>
> _______________________________________________
> users mailing list
> users at lists.scilab.org <mailto:users at lists.scilab.org>
> http://lists.scilab.org/mailman/listinfo/users
> <https://antispam.utc.fr/proxy/1/c3RlcGhhbmUubW90dGVsZXRAdXRjLmZy/lists.scilab.org/mailman/listinfo/users>
>
>
>
>
> _______________________________________________
> dev mailing list
> dev at lists.scilab.org <mailto:dev at lists.scilab.org>
> https://antispam.utc.fr/proxy/1/c3RlcGhhbmUubW90dGVsZXRAdXRjLmZy/lists.scilab.org/mailman/listinfo/dev
> <https://antispam.utc.fr/proxy/2/c3RlcGhhbmUubW90dGVsZXRAdXRjLmZy/antispam.utc.fr/proxy/1/c3RlcGhhbmUubW90dGVsZXRAdXRjLmZy/lists.scilab.org/mailman/listinfo/dev>
>
> _______________________________________________
> dev mailing list
> dev at lists.scilab.org
> http://lists.scilab.org/mailman/listinfo/dev
>
>
>
>
> _______________________________________________
> dev mailing list
> dev at lists.scilab.org
> https://antispam.utc.fr/proxy/1/c3RlcGhhbmUubW90dGVsZXRAdXRjLmZy/lists.scilab.org/mailman/listinfo/dev
--
Stéphane Mottelet
Ingénieur de recherche
EA 4297 Transformations Intégrées de la Matière Renouvelable
Département Génie des Procédés Industriels
Sorbonne Universités - Université de Technologie de Compiègne
CS 60319, 60203 Compiègne cedex
Tel : +33(0)344234688
http://www.utc.fr/~mottelet
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.scilab.org/pipermail/dev/attachments/20200507/c59a56ff/attachment.htm>
More information about the dev
mailing list