[scilab-Users] unable to create multiple subplots, e.g. plot() produces 2nd subplot only, first disappears

[jordan alexander]

dear julio

attached is the screenshot of my result of runing your code...


i looked at the your attached screenshot of your result

yes, that is what i expect!

instead, i get my attached screenshot!
  
ciao, jordan



________________________________
From: Julio Gonzalez-Saenz <julio.gonzalez at ymail.com>
To: users at lists.scilab.org
Sent: Thu, April 22, 2010 3:05:06 AM
Subject: Re: [scilab-Users] unable to create multiple subplots, e.g. plot() produces 2nd subplot only, first disappears


Dear Jordan,

Can you please run this simple subplot program:

clf()
omega0=1;
k=[0.2 1 3];
n=0;
for kappa=k
    n=n+1;
    omega=sqrt(omega0^2-kappa^2);
    t=0:0.01:8*%pi;
    if (omega==0)
        y=exp(-kappa.*t).*t;
    else 
        y=exp(-kappa.*t).*sin(omega*t)/omega;
    end
    if n==1
      subplot(2,1,1)  // It will spawn over two columns
    else
       subplot(2,2,n+1)
    end
    plot(t,y);
    legend(['kappa = '+ string(kappa)]); // I could not figutre out
    // how to write greek characteres. num2str does not exist in SCILAB
end




________________________________
From: jordan alexander <alexanjo at yahoo.com>
To: users at lists.scilab.org
Sent: Wed, 21 April, 2010 12:29:40
Subject: Re: [scilab-Users] unable to create multiple subplots, e.g. plot() produces 2nd subplot only, first disappears


dear julio


code is: 

subplot(2,1,1)
plot(1:10)  
subplot(2,1,2)
plot(1:10)

attached is a screen-shot of the result

after issuing subplot(2,1,2) and plot(1:10) commands, the first subplot--subplot(2,1,1)--disappears!

any hints how to further troubleshoot this odd and persistent behaviour i am having with scilab 5.x?

ciao, jordan

p.s. i do not experience this behaviour with scilab 4.1.2 


________________________________
From: Julio Gonzalez-Saenz <julio.gonzalez at ymail.com>
To: users at lists.scilab.org
Sent: Wed, April 21, 2010 4:12:11 AM
Subject: Re: [scilab-Users] unable to create multiple subplots, e.g. plot() produces 2nd subplot only, first disappears


Dear Jordan,

I can see the graphics but not the code...

Regards,

Julio




________________________________
From: jordan alexander <alexanjo at yahoo.com>
To: users at lists.scilab.org
Sent: Tue, 20 April, 2010 1:54:04
Subject: Re: [scilab-Users] unable to create multiple subplots, e.g. plot() produces 2nd subplot only, first disappears


dear julio

attached is a screen-shot of the console--showing code--and resulting graphic window

ciao, jordan  





________________________________
From: Julio Gonzalez-Saenz <julio.gonzalez at ymail.com>
To: users at lists.scilab.org
Sent: Tue, April 20, 2010 11:08:11 AM
Subject: Re: [scilab-Users] unable to create multiple subplots, e.g. plot() produces 2nd subplot only, first disappears


Hi Jordan,

Can you please post your code??




________________________________
From: jordan alexander <alexanjo at yahoo.com>
To: users at lists.scilab.org
Sent: Tue, 20 April, 2010 1:02:25
Subject: Re: [scilab-Users] unable to create multiple subplots, e.g. plot() produces 2nd subplot only, first disappears

hello

>To change the adressed area, just do
>subplot(nL,nC, nB)


after issuing the command plot(), the first subplot, i.e. subplot(1,2,1), has disappeared and i am unable to make it re-appear.  issuing subplot(1,2,1) after plot() does not make the first one re-appear

issuing gca indicates there are two Axes children, yet only the second is visible

issuing   xs2eps(0,'test.eps') after plot() creates file with both plots visible

any other hints here to get the first subplot visible?

jordan


----- Original Message ----
From: Samuel Gougeon <Samuel.Gougeon at univ-lemans.fr>
To: users at lists.scilab.org
Sent: Mon, April 19, 2010 11:02:29 PM
Subject: Re: [scilab-Users] unable to create multiple subplots, e.g. plot() produces 2nd subplot only, first disappears

Hello,
----- Message d'origine -----
De : jordan alexander
Date : 19/04/2010 12:52:
> dear lists.scilab.org
> 
> creating subplots is not working for me 
> 
> using  scilab 5.x running on fedora 11, thinkpad t500 laptop, graphics driver = 'intel integrated graphics chipset'  
subplot(nL,nC, nA) virtually shares the current graphic windows in
nL lines and nC columns of rectangular sub-area, and adresses the
nA'th one for the forthcoming plotting commands.
To change the adressed area, just do
subplot(nL,nC, nB)
Then the nB'th one becomes the current one.

Samuel


      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.scilab.org/pipermail/users/attachments/20100421/9f3083a7/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Screenshot.png
Type: application/octet-stream
Size: 65339 bytes
Desc: not available
URL: <https://lists.scilab.org/pipermail/users/attachments/20100421/9f3083a7/attachment.obj>