[scilab-Users] Stacksize problem

[ray joseph]

Tom,

Please consider letting us know what you found / how the issue was resolved.  

No experiment is a failure unless we fail to learn from it.

ray
  ----- Original Message ----- 
  From: tom sedgman 
  To: users at lists.scilab.org 
  Sent: Thursday, April 29, 2010 8:53 AM
  Subject: Re: [scilab-Users] Stacksize problem


        Thanks, resolved it.

        --- On Thu, 29/4/10, Collette yann <yann.collette at scilab.org> wrote:


          From: Collette yann <yann.collette at scilab.org>
          Subject: Re: [scilab-Users] Stacksize problem
          To: users at lists.scilab.org
          Date: Thursday, 29 April, 2010, 14:39


          Hello,

          The maximum memory of Scilab is limited to around 1Go.
          So, if your data set is too big, it will never fit in the Scilab stack.

          You can try to use:

          stacksize('max')

          to get the maximum stacksize or try to load a smaller data set.

          YC

          Le 29/04/2010 15:23, tom sedgman a écrit : 
                  Hi,

                  i'm trying to perform some signal analysis and i keep getting error 17, i've added the stacksize function but the problem persists, has anyone else had this problem? any help would be greatly appreciated.
                 



       

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.scilab.org/pipermail/users/attachments/20100429/5c6d662e/attachment.htm>