Modelling, Simulation and Controlling of Permanent Magnet Synchronous Machine under Scilab/Xcos

[ierturk]

In this study, The model which is previously developed under ScicosLab PMSM
d-q model is ported to Scilab/Xcos. Two model is developed to simulation as
PMSM Machine and PMSM Controller. While, PMSM model is developed as a
C-Block, standart Xcos blocks is used to create PMSM Controler.

 Also, previous Xcos models (BLDC Machine and BLDC controler) are available
in this study.

 In PMSM Machine Model, rotor flux is sinusoidal. Instead of hall sensor, an
output is added to model as indicate rotor position. Model is based on
Matlab SimPowerSystem Blockset. Detailed information about model can be
found at link below.

 In PMSM Controller Model, Speed control is done. It based on filed oriented
control (FOC), and DC bus voltage is adjusted by PI controller to acheive
required speed.

 Required simulation files can be downloaded from links below. Also, It
includes source files of models.

 To run model, it is sufficient execute RunFirst.sce after extract archive
in Scilab/Xcos enviroment. Script creates libraries and interfaces and open
xcos model.

 Model Developed under Below Configuration
 • Scilab 5.3.2 Stable
 • Windows Vista 32Bit
 • Microsoft Visual C++ 2010 Express

http://www.stargate-tr.com/?p=1279

ierturk

--
View this message in context: http://mailinglists.scilab.org/Modelling-Simulation-and-Controlling-of-Permanent-Magnet-Synchronous-Machine-under-Scilab-Xcos-tp2957144p2957144.html
Sent from the Scilab users - Mailing Lists Archives mailing list archive at Nabble.com.