GL2PS error when exporting

[Dean Parsons]

Oops, I forgot to mention that my linux terminal gives me the following error message when I run xs2svg:

GL2PS error: gl2psBeginPage called in wrong program state

Regards,

Dean Parsons


Hi,

I'm running scilab 5.1 64 bit on linux. (I had to change the Device to "vesa" in the "Device" Section of the /etc/X11/xorg.conf file to get the graphics to work correctly.)

When I run xs2svg I get the following error:

xs2svg: GL2PS error during export.
at line     412 of exec file called by :
  exec(%fileToExec);                 disp(msprintf(gettext("Execution done.\
while executing a callback

Here is my getdebuginfo report:
-->getdebuginfo()
 ans  =

!Total memory:   57735164            !
!                                    !
!Used memory:   38645904             !
!                                    !
!Free memory:   19089260             !
!                                    !
!Shared memory:          0           !
!                                    !
!Buffers memory:     814472          !
!                                    !
!Cached memory:   25137332           !
!                                    !
!Used -/+ buffers/cache:   12694100  !
!                                    !
!Free -/+ buffers/cache:   45041064  !
!                                    !
!Total swap:   16771852              !
!                                    !
!Used swap:        196               !
!                                    !
!Free swap:   16771656               !

My graphics card is an nVidia Quadro FX3450. The driver is version A1391.85 dated 10/30/2007. From my searching on the internet I believe this is the most recent version of the driver. Another engineer here tells me the driver version is 173.14.22

Any suggestions as to how I can work around this?

Thanks,

Dean Parsons

CONFIDENTIALITY NOTICE: This e-mail message, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.scilab.org/pipermail/users/attachments/20120313/f20e2a43/attachment.htm>