[Scilab-users] Xcos RLC_Modelica electrical demo has faulty wiring

[Nobuo Hizume]

Dear Xcos electrical palette users:
Regarding above, I resend the mail.
Please disregard the one which I sent on Dec.26. with Chinese signature.

I have tried  the RLC_Modelica demo recently and found
the result was not correct due to faulty wiring of blocks.

In that circuit the phase of the voltage should exceed that of the current
by  π/2 rad. 
But the result shows the opposite because the VsourceAC and
the CurrentSensor are connected wrongly.

If you connect the VsourceAC’s black positive port to the resistor’s
black port, the white port to the CurrentSensor’s white port & the Ground,
and the CurrentSensor’s black port to the VoltageSensor’s white port,
you get the correct result.

Please let me know your opinion.
For your information, I’ve been using Scilab5.4.1 on Windows7 32 bit and Visual C++ 2010 express.
I appreciate your help.
Thank you in advance.
Nobuo Hizume
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.scilab.org/pipermail/users/attachments/20131229/662977a5/attachment.htm>