[Scilab-users] "Smoothing" very localised discontinuities in (scilab: to exclusive) (scilab: to exclusive) (scilab: to exclusive) (scilab: to exclusive) curves.

[Perrichon]

1000 messages !


Before printing, think about ENVIRONMENTAL responsabity

-----Message d'origine-----
De : users [mailto:users-bounces at lists.scilab.org] De la part de Rafael
Guerra
Envoyé : lundi 4 avril 2016 22:24
À : 'Users mailing list for Scilab' <users at lists.scilab.org>
Objet : Re: [Scilab-users] "Smoothing" very localised discontinuities in
(scilab: to exclusive) (scilab: to exclusive) (scilab: to exclusive)
(scilab: to exclusive) curves.

Burk.

I am sending results as Plain Text with attachments.

PS: the former pictures were embedded in a HTML-email which I could read
fine.

Rgds
Rafael

-----Original Message-----
From: users [mailto:users-bounces at lists.scilab.org] On Behalf Of
scilab.20.browseruk at xoxy.net
Sent: Monday, April 04, 2016 8:43 PM
To: users at lists.scilab.org
Subject: Re: [Scilab-users] "Smoothing" very localised discontinuities in
(scilab: to exclusive) (scilab: to exclusive) (scilab: to exclusive)
(scilab: to
exclusive) curves.

Rafael,

> Buk.,
> 
> Tested the 3-point median filter solution on your data and results 
> seem Ok to> me:
> 
> 
> ZOOM around 0.4-0.5:
> 
> 
> Note that in my original example I had shifted (by 5e-3 one of my 
> curves for display purposes only, but no shift was applied the in 
> above displays)

This reads as though you've attached some "displays" to your post, but
nothng made it to me?

> 
> Regards,
> Rafael

I will try and replicate it here; but my unfamiliarity with SciLab means it
sometimes takes me a while to get these things to work :(

Thanks, Buk