[Scilab-users] Scilab Error Message: CVode

[Paul Bignier]

Hello Noguchi,

Try loosening the tolerances instead of tightening them.
With 1e-2, the simulation goes much further because the solver 
disregards the results a lot more.

Hope this helps,
Regards,
Paul

On 01/11/2016 11:30 AM, noguchi wrote:
> Thank you for your feedback.
>
> I reduced solver tolerance from Simulation, Parameter settings as per
> attached file.
> I changed 1.0E-6  ==> 1.0E-12
>
> However, I still get same error message.
>
> May I ask your further help to solve this problem?
>
> SCilab_Sim_Setting.jpg
> <http://mailinglists.scilab.org/file/n4033262/SCilab_Sim_Setting.jpg>
>
>
>
> --
> View this message in context: http://mailinglists.scilab.org/Scilab-users-Scilab-Error-Message-CVode-tp4033255p4033262.html
> Sent from the Scilab users - Mailing Lists Archives mailing list archive at Nabble.com.
> _______________________________________________
> users mailing list
> users at lists.scilab.org
> http://lists.scilab.org/mailman/listinfo/users

-- 
Paul BIGNIER
Development engineer
-----------------------------------------------------------
Scilab Enterprises
143bis rue Yves Le Coz - 78000 Versailles, France
Phone: +33.1.80.77.04.68
http://www.scilab-enterprises.com