[Scilab-users] MinGw toolbox 0.10.0 is not compatible with Scilab 6.0

[Nikolay Strelkov]

Dear Scilab users and developers!

I have installed Scilab 6.0 x86 and x86_64 on my Windows 8.1 x86_64 laptop.

Also I have downloaded and installed gcc-6.2.0 for x86
<http://atoms.scilab.org/toolboxes/mingw/0.10.0/files/gcc-6.2.0-32.exe> and
x86_64
<http://atoms.scilab.org/toolboxes/mingw/0.10.0/files/gcc-6.2.0-64.exe> as
prerequisites of MingGw toolbox
<https://atoms.scilab.org/toolboxes/mingw/0.10.0>.
Then I installed MinGw toolbox in Scilabs with atomsInstall('mingw'). This
process was successful.
Then I restarted Scilab and tried to test MinGw toolbox with
atomsTest('mingw').

The results are not good - on both x86 and x86_64 - 13 tests of 15 are
failed. Only *G_make* and *dllinfo* are passed.
I do not attach logs - the error is always the same "failed: Slave Scilab
exited with error code 1 ".

If I launch these unit-tests manually (with cd SCIHOME\atoms\x64\mingw\0.10.
0\tests\unit_tests\ and corresponding exec *.tst )
I got messages such as

WARNING: C:\Users\nikolay\AppData\Roaming\Scilab\SCILAB~2.0\
atoms\x64\mingw\010~1.0\macros\scripts\TEMPLATE_MAKEFILE.MINGWnot found.

 make: *** No rule to make target 'all'.  Stop.
at line    25 of function dlwCompile   ( C:\Users\nikolay\AppData\
Roaming\Scilab\SCILAB~2.0\atoms\x64\mingw\010~1.0\macros\windows\dlwCompile.sci
line 34 )
at line    70 of function ilib_compile ( C:\Program
Files\scilab-6.0.0\modules\dynamic_link\macros\ilib_compile.sci line 86 )
at line   129 of function ilib_build   ( C:\Program
Files\scilab-6.0.0\modules\dynamic_link\macros\ilib_build.sci line 142 )
at line    17 of executed file C:\Users\nikolay\AppData\
Roaming\Scilab\scilab-6.0.0\atoms\x64\mingw\0.10.0\tests\
unit_tests\addinter.tst

ilib_compile: Error while executing Makelib.


Also I tried to launch Xcos model with Modelica blocks with
xcos("SCI/modules/xcos/demos/Electrical/Bridge_Rectifier.zcos");
then with Simulation->Start got error in console
--> xcos("SCI/modules/xcos/demos/Electrical/Bridge_Rectifier.zcos");
--------------------------------------------\
 Main Modelica : C:\Users\nikolay\AppData\Local\Temp\SCI_TMP_6052_26419\
Bridge_Rectifier_im.mo

 Flat Modelica : C:\Users\nikolay\AppData\Local\Temp\SCI_TMP_6052_26419\
Bridge_Rectifier_imf.mo
 Simulation C code :C:\Users\nikolay\AppData\Local\Temp\SCI_TMP_6052_26419\
Bridge_Rectifier_im.c
   Generate a loader file
   Generate a Makefile
WARNING: C:\Users\nikolay\AppData\Roaming\Scilab\SCILAB~2.0\
atoms\mingw\010~1.0\macros\scripts\TEMPLATE_MAKEFILE.MINGWnot found.
   Running the Makefile
   Compilation of Bridge_Rectifier_im.obj
   Building shared library (be patient)

 make: *** No rule to make target 'clean'.  Stop.

!sorry compiling problem                       !
!                                              !
!ilib_compile: Error while executing Makelib.  !

 c_pass1: build the modelica meta-block failed

 xcos_simulate: Error during block parameters update.


After manual move of 'scripts/TEMPLATE_MAKEFILE.MINGW' to
'macros/scripts/TEMPLATE_MAKEFILE.MINGW' atomsTest('mingw')
reports 10 passed tests (failed are: *addinter, ilib_build, ilib_build_2,
ilib_build_cpp, links*).
But Xcos models with Modelica blocks can be simulated except 2 crashes (*Ball
on a Platform* and *Chaos Modelica*)

Scilab 5.5.2 (x86 and x86_64) works normally on the same machine with
mingw-0.9.3 (and gcc-4.6.3).



Where is an error - in Scilab or in MinGw toolbox?
Should I report bug?


--




*With best regards,Ph.D., assistant professor at MPEI
<http://mpei.ru/lang/en/Pages/default.aspx>,IEEE member,maintainer of
Mathieu functions toolbox for Scilab
<http://atoms.scilab.org/toolboxes/Mathieu/>,Nikolay Strelkov.*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.scilab.org/pipermail/users/attachments/20170218/0c853202/attachment.htm>