[Scilab-users] Increase memory
SCHULZ Wolfgang
W.Schulz at ove.at
Thu Nov 2 08:55:20 CET 2017
Hello,
I would recommend changing to SCILAB 6. There the stacksize doesn't exist and you can use the installed memory of your PC.
Wolfgang
Von: users [mailto:users-bounces at lists.scilab.org] Im Auftrag von Paul Bignier
Gesendet: Dienstag, 31. Oktober 2017 12:38
An: users at lists.scilab.org
Betreff: Re: [Scilab-users] Increase memory
Hello Matteo,
Thank you for reporting this issue, could you please report it to our bugzilla with a minimal test-case as well as your config (Scilab version, your operating system, installed toolboxes, ...)?
http://bugzilla.scilab.org/enter_bug.cgi?product=Scilab%20software
Best regards,
Paul
Paul BIGNIER
Development engineer
-----------------------------------------------------------
ESI Group - Scilab
99 rue des Solets - 94513 Rungis, France
Phone: +33.1.41.73.58.77
https://scilab.io
https://esi-group.com
________________________________
From: users <users-bounces at lists.scilab.org<mailto:users-bounces at lists.scilab.org>> on behalf of Matteo Toma <MatteoToma at Cozzani.com<mailto:MatteoToma at Cozzani.com>>
Sent: Monday, October 30, 2017 3:45 PM
To: users at lists.scilab.org<mailto:users at lists.scilab.org>
Subject: [Scilab-users] Increase memory
Hello
I'm working with very large matrices and I use the karmarkar function.
When processing comes to the karmakar function.
Scilab says:
"Stack size has been exceeded!"
I used the maximum stacksize value but the error remains.
My running computer on Windows has 8GB of memory so that the computer is not the limiting factor. There is a way to increase the maximum stack size?
Best regards
Matteo Tomà
Production Engineer
matteotoma at cozzani.com<mailto:alicebartoli at cozzani.com>
[cid:image003.jpg at 01D353B8.4FF39E10]
DOTT.ING.MARIO COZZANI S.r.l.
Viale XXV Aprile, 7
19021 Arcola (SP) - ITALY
Tel. :+39 0187 955 81
Fax. :+39 0187 955 853
info at cozzani.com<mailto:info at cozzani.com>
www.cozzani.com <http://www.cozzani.com/>
This email message is for the exclusive use of the intended recipient(s) and may contain confidential, privileged and non-disclosable information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email immediately and destroy any and all copies of the message.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.scilab.org/pipermail/users/attachments/20171102/2705aba5/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.gif
Type: image/gif
Size: 64 bytes
Desc: image001.gif
URL: <https://lists.scilab.org/pipermail/users/attachments/20171102/2705aba5/attachment.gif>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.png
Type: image/png
Size: 167 bytes
Desc: image002.png
URL: <https://lists.scilab.org/pipermail/users/attachments/20171102/2705aba5/attachment.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image003.jpg
Type: image/jpeg
Size: 14977 bytes
Desc: image003.jpg
URL: <https://lists.scilab.org/pipermail/users/attachments/20171102/2705aba5/attachment.jpg>
More information about the users
mailing list