[Scilab-users] Scilab/xcos 6.0.0 - Superblock and port naming issues

[Paul Bignier]

Hello Yves,

Could you please report this issue to our Bugzilla<http://bugzilla.scilab.org/enter_bug.cgi?product=Scilab%20software>?

You may also try with our latest nightly builds<http://www.scilab.org/en/development/nightly_builds>.

Thanks a lot for your contribution!

Regards,

Paul



Paul BIGNIER
Development engineer
-----------------------------------------------------------
ESI Group - Scilab
99 rue des Solets - 94513 Rungis, France
Phone: +33.1.41.73.58.77
https://scilab.io
https://esi-group.com


________________________________
From: users <users-bounces at lists.scilab.org> on behalf of Yves Rambi <Yves.Rambinintsoa at gmail.com>
Sent: Tuesday, October 3, 2017 10:22 AM
To: users at lists.scilab.org
Subject: [Scilab-users] Scilab/xcos 6.0.0 - Superblock and port naming issues

Hello,
I am using Scilab on both OS
- MS Windows (6.0.0)
- Linux (5.5.0)

For the Windows version I have following issues with Xcos:
*Issue 1: Wrong port number*
- I create a Superblock
- In the Superblock I add an input or an output port
- An error message appears stating "Evaluation porblem: Wrong port number"
and the number of the  new port doesnt increment but stays by "1" (It's the
same for outputs)
<http://mailinglists.scilab.org/file/t497169/Superblock_Port_Insert_Failure_2.png>

*Issue 2: Port/Block name disappear*
- When I give a port a name through "format" ...(Strg+F2) and close the
window the port names don't appear in the upper level
<http://mailinglists.scilab.org/file/t497169/Superblock_Port_Naming.png>

<http://mailinglists.scilab.org/file/t497169/Superblock_After_Port_Naming.png>


Both issues don't appear on Linux version (5.5.0).

Is there a workaround or are there some special settings I miss here?



--
Sent from: http://mailinglists.scilab.org/Scilab-users-Mailing-Lists-Archives-f2602246.html
_______________________________________________
users mailing list
users at lists.scilab.org
http://lists.scilab.org/mailman/listinfo/users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.scilab.org/pipermail/users/attachments/20171003/78fc48e8/attachment.htm>