[Scilab-users] How to print GUI window?

[VTX1801]

Samuel,
Windows 10 OS.
The screen resolution of my laptop is set to 1920x1080.
I still see the problems after atomsUpdate("gui2bitmap").

The GUI is completely inside the screen. 
With about 1/4" gap above and below and about 1 inch on either side.

The GUI appears to grow 1/4 inch only to the right side and down directions
when gui2bitmap is executed.
The resulting gui2bitmap look zoomed in and loses 3 inches from the right
side and an inch or more from the bottom.

Additionally, the area to the left and above the gui2bitmap screen capture
shows the background of what was behind the GUI.

I executed the following command atomsUpdate("gui2bitmap"), and restarted
Scilab.
No difference.

Willing to redesign the GUI. How to make the graph area smaller with the
same size uicontrols to result in slightly smaller GUI size?

Lastly, tested using Snipping Tool software with mode set for window
capture.
Click on the GUI window and the complete GUI window appears in the Snipping
Tool window with an all white background.

Unfortunately, printing results with image printed on two sheets with
printer basic preferences orientation set to "landscape" and advanced
preferences scaling set to "fit to paper size".
Vertical size fits the paper sheet but additional 2.6 inches on the second
paper sheet.

Very frustrating.

Please advise,
Ted






--
Sent from: http://mailinglists.scilab.org/Scilab-users-Mailing-Lists-Archives-f2602246.html