[Scilab-users] Small problem with Scilab 6.0.1 code generation
Vilppu
vilppu91 at hotmail.com
Fri Feb 15 08:36:53 CET 2019
Hello,
Thank you for the quick reply.
Scilab6_step.zcos
<http://mailinglists.scilab.org/file/t497907/Scilab6_step.zcos>
I have attached the Xcos model which I'm testing. It is just the step
function example with CLR and mux blocks inside a super block.
When I have the warning function set to stop and I try to generate code from
the super block, I get this pop-up window titled Scilab Message:
*** Execution stopped after a warning. ***
Set warning("on") to continue execution after a warning.
After I click ok. I get a new Scilab message:
Generated block cannot be linked with Scilab.
I have this text in Scilab console:
operation +: Warning adding a matrix with the empty matrix will give an
empty matrix result.
blk =
[]
When I have the warning function set to on and I try to generate code from
the super block, I get this text in Scilab console:
operation +: Warning adding a matrix with the empty matrix will give an
empty matrix result.
operation +: Warning adding a matrix with the empty matrix will give an
empty matrix result.
operation +: Warning adding a matrix with the empty matrix will give an
empty matrix result.
Generate a loader file
Generate a Makefile
Running the Makefile
Compilation of test.obj
Compilation of test_void_io.obj
Compilation of test_Cblocks.obj
Building shared library (be patient)
Generate a cleaner file
Shared archive loaded.
Link done.
blk =
GUI : test_c
Graphics:
orig = [190,110]
sz = [100,90]
exprs = []
pin = 0
pout = 0
pein = []
peout = []
gr_i = []
id = ""
in_implicit = "E"
out_implicit = "E"
in_style =
"ExplicitInputPort;align=left;verticalAlign=middle;spacing=10.0;rotation=0"
out_style =
"ExplicitOutputPort;align=right;verticalAlign=middle;spacing=10.0;rotation=0"
in_label = ""
out_label = ""
style = "SUPER_f"
Model :
test type: 4
in = 1
in2 = 1
intyp = 1
out = 2
out2 = 1
outtyp = 1
evtin = []
evtout = []
state = 0
dstate = [0;0;0;0]
odstate = list(0,0,[0;0])
rpar : SuperBlock
ipar = [2;1;1]
opar = list()
blocktype = "c"
firing = []
dep_ut = [%t,%t]
label = ""
nzcross = 0
nmode = 0
equations = list()
uid = ""
--
Sent from: http://mailinglists.scilab.org/Scilab-users-Mailing-Lists-Archives-f2602246.html
More information about the users
mailing list