[Scilab-users] Xcos Editor in Scilab 6.1.0 breaks diagrams

[Perrichon]

Hello Clément

This is done
See bugzilla #16343

BR


Before printing, think about ENVIRONMENTAL responsabity


-----Message d'origine-----
De : users <users-bounces at lists.scilab.org> De la part de Clément David
Envoyé : vendredi 28 février 2020 09:53
À : Users mailing list for Scilab <users at lists.scilab.org>
Objet : Re: [Scilab-users] Xcos Editor in Scilab 6.1.0 breaks diagrams

Hello Pierre,

Could you please open a Bugzilla report with the attached diagram,
Scilab/Xcos 5.5.2 might set some positions incorrectly decoded in
Scilab/Xcos 6.1.0 ?

Thanks,

--
Clément

> -----Original Message-----
> From: users <users-bounces at lists.scilab.org> On Behalf Of Perrichon
> Sent: Thursday, February 27, 2020 7:35 PM
> To: 'Users mailing list for Scilab' <users at lists.scilab.org>
> Subject: [Scilab-users] Xcos Editor in Scilab 6.1.0 breaks diagrams
> 
> Hello,
> 
> 
> 
> Xcos Editor in Scilab  6.1.0 breaks  diagrams. Number of failure is big.
> 
> Must I understand I've to rewrite all my projects in Scilab 6.1.0.
> 
> 
> 
> Here is an example (with  several minus zooms)
> 
> The big box in simply a MUX in the standard Palette, normaly drawn at 
> the bottom of this diagram
> 
> 
> 
> Must I write a bugzilla ?
> 
> 
> 
> Best regards
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 

_______________________________________________
users mailing list
users at lists.scilab.org
http://lists.scilab.org/mailman/listinfo/users
-------------- next part --------------
A non-text attachment was scrubbed...
Name: M_ Pierre PERRICHON.vcf
Type: text/x-vcard
Size: 2865 bytes
Desc: not available
URL: <https://lists.scilab.org/pipermail/users/attachments/20200228/3b0311cc/attachment.vcf>