[Scilab-users] Sci-IPOpt updated
Stéphane Mottelet
stephane.mottelet at utc.fr
Wed Sep 30 12:14:14 CEST 2020
Hi,
Can you restart Scilab but in console mode ? You should have a dialog
box giving more information about the link problem)
S.
Le 30/09/2020 à 09:51, CHEZE David 227480 a écrit :
>
> Hello Stéphane,
>
> I’ve just make an attempt to install the Sci-IPOpt toolbox from atoms
> on windows_10_64bits OS, following your recommendations below. I got
> message that the fix (after exec windows_ifort_fix.sce) was
> successfully applied but once I restart Scilab (6.1.0 release), the
> module fails to load with the message:
>
> Start SciIPOpt
>
> Load gateways
>
> atomsLoad : Une erreur est survenue au cours du chargement de
> 'sci_ipopt-1.0':
>
> exec: error on line #18: "link : La bibliothèque partagée n'a pas été
> chargée: Unknown Error"
>
> nb: I’ve quite recent Intel visual fortran composer xe (2018)
> installed on this machine which may interfere with the fix ?
>
> Regards,
>
> David
>
> *De :*users <users-bounces at lists.scilab.org> *De la part de*
> stephane.mottelet at utc.fr
> *Envoyé :* mardi 29 septembre 2020 21:59
> *À :* Users mailing list for Scilab <users at lists.scilab.org>
> *Objet :* Re: [Scilab-users] Sci-IPOpt updated
>
> Hello,
>
> This year Christmas arrived in september: although Windows really
> sucks, I managed with the help of Antoine to build a version of the
> toolbox for this operating system. Windows users should be able to
> install sci_ipopt from the atoms GUI (Optimization category). However,
> there is a little glitch because the Intel Fortran runtime bundled
> with Scilab is a little bit outdated and this is a problem for the
> thirdparty ipopt DLL. Hence, once you have installed the toolbox,
> loading it after a restart will fail. Hopefully there is an easy fix
> and I have bundled a little script dedicated to this. Hence, after the
> Scilab restart and the failing Sci-IPOpt load, just type the following
> at Scilab's prompt:
>
> --> cd(atomsGetInstalledPath("sci_ipopt"))
> --> exec windows_ifort_fix.sce
>
> then restart Scilab: the toolbox should load just fine (run one of the
> demos to make sure that everything works). The Intel Fortran runtime
> will surely be updated for the next Scilab release and this fix won't
> be anymore necessary.
>
> S.
>
> Stéphane Mottelet <stephane.mottelet at utc.fr
> <mailto:stephane.mottelet at utc.fr>> a écrit :
>
> Hello,
>
> The Sci-IPOpt toolbox has been updated and now work (smoothly) for
> Scilab 6.1. Users needing a serious tool for doing optimization
> with general nonlinear constraint should give it a try. There is
> no Windows version for the moment but I hope we will have one
> before Christmas !
>
> Enjoy !
>
> --
> Stéphane Mottelet
> Ingénieur de recherche
> EA 4297 Transformations Intégrées de la Matière Renouvelable
> Département Génie des Procédés Industriels
> Sorbonne Universités - Université de Technologie de Compiègne
> CS 60319, 60203 Compiègne cedex
> Tel : +33(0)344234688
> https://antispam.utc.fr/proxy/1/c3RlcGhhbmUubW90dGVsZXRAdXRjLmZy/www.utc.fr/~mottelet
> <https://antispam.utc.fr/proxy/2/c3RlcGhhbmUubW90dGVsZXRAdXRjLmZy/antispam.utc.fr/proxy/1/c3RlcGhhbmUubW90dGVsZXRAdXRjLmZy/www.utc.fr/~mottelet>
>
> _______________________________________________
> users mailing list
> users at lists.scilab
> <mailto:users at lists.scilab>.orghttps://antispam.utc.fr/proxy/1/c3RlcGhhbmUubW90dGVsZXRAdXRjLmZy/lists.scilab.org/mailman/listinfo/users
> <orghttps://antispam.utc.fr/proxy/1/c3RlcGhhbmUubW90dGVsZXRAdXRjLmZy/lists.scilab.org/mailman/listinfo/users>
>
>
>
> _______________________________________________
> users mailing list
> users at lists.scilab.org
> https://antispam.utc.fr/proxy/1/c3RlcGhhbmUubW90dGVsZXRAdXRjLmZy/lists.scilab.org/mailman/listinfo/users
--
Stéphane Mottelet
Ingénieur de recherche
EA 4297 Transformations Intégrées de la Matière Renouvelable
Département Génie des Procédés Industriels
Sorbonne Universités - Université de Technologie de Compiègne
CS 60319, 60203 Compiègne cedex
Tel : +33(0)344234688
http://www.utc.fr/~mottelet
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.scilab.org/pipermail/users/attachments/20200930/35c19ce4/attachment.htm>
More information about the users
mailing list