Hi Rakhi, <div>  I'm not sure how much this would help, I would give it though-</div><div><a href="http://www.comedi.org/index.html">http://www.comedi.org/index.html</a></div><div>They're into linux measurement and control interface. They do provide support for many manufacturers including National Instruments. </div>
<div><br></div><div>Hope this helps. </div><div><br></div><div>Best Wishes</div><div>mahesha</div><div><br></div><div>P.S. If you've got ubuntu, you can get directly get from synaptic package manager. Is it possible to think about converting the data into required format at system level itself? Linux is pretty good at doing such things, and interesting part is it's open source. :) </div>
<div><br><div class="gmail_quote">On Fri, Sep 17, 2010 at 12:23 PM,  <span dir="ltr"><<a href="mailto:rakhi@iitb.ac.in">rakhi@iitb.ac.in</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex;">
Hi<br>
<br>
I am using a NI USB 6008 in Mandriva Linux 2006. I have installed NI DAQmx<br>
base 2.1.0. I have downloaded SCilab DAQ toolbox 0.2 and followed the<br>
instructions for loading the toolbox in scilab 4.1.2.<br>
While executing the builder, i get some warining messages<br>
sh: sabcmd not found.. which i understand is because of a missing package<br>
called sablotron. I assume this warning would not be affecting execution<br>
of my .sce files. So I executed the loader. After connecting my NI USB<br>
6008, I tried to run the voltupdate.sce given in the daq toolbox 0.2. and<br>
then read this analog value through acquire1scan.sce. (Physically<br>
connected the analog output to the analog input) But it says "acquired<br>
reading : nan". I had already done this experiment using the c example<br>
codes provided by NI and i succeeded. Could anyone help me out?<br>
<br>
Thanks<br>
Rakhi<br>
</blockquote></div><br></div>