<div dir="ltr">Sure thing Tim,<div><br></div><div>Thank you for pointing out those details. I will share as much as I can.</div><div><br></div><div>I am simulating the behavior of a battery as it is discharging into a circuit. I recorded data from the battery (for example, the voltage and current and internal resistance) during testing. I currently have the data at different time steps inside of an excel file.</div><div><br></div><div>I would like to test this battery under different circuit configurations. However, changing the circuit can be time consuming and expensive. I was thinking that I could use xcos ability to do circuit simulation to construct a basic model of the battery that I am using that utilizes the data that I gathered. This way I can simulation the battery under different circuit configurations very easily.</div><div><br></div><div>So I was wondering if there was a way that I could import my data into xcos to construct a model for simulation.</div><div><br></div><div>I actually created the system to simulate the battery.</div></div><div class="gmail_extra"><br><div class="gmail_quote">On Tue, Apr 11, 2017 at 3:48 PM, Tim Wescott <span dir="ltr"><<a href="mailto:tim@wescottdesign.com" target="_blank">tim@wescottdesign.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">"Simulate the data"?<br>
<br>
Surely you mean you wish to simulate the system which was used in the<br>
measurement!<br>
<br>
You don't give much detail, but I suspect that what you want to do is<br>
to develop a model of the system that fits the experiment, and then use<br>
that model in your simulations.<br>
<br>
The general term for generating the model is called "system<br>
identification", but that covers a pretty broad swath.<br>
<br>
Can you share the test you did, the sort of data you collected, the<br>
sort of system you're trying to model, and how well you know the system<br>
itself?<br>
<div><div class="h5"><br>
On Tue, 2017-04-11 at 15:10 -0400, phillip mobley wrote:<br>
> Hello all,<br>
><br>
> I have some data from a test that I preformed. I was looking to<br>
> simulate this data under different conditions and I was wondering if<br>
> there is a palette in xcos that would allow me to input data (maybe<br>
> from an excel spreadsheet or copy paste) in order to use in the<br>
> simulation?<br>
><br>
> Is this possible with xcos?<br>
</div></div>> ______________________________<wbr>_________________<br>
> users mailing list<br>
> <a href="mailto:users@lists.scilab.org">users@lists.scilab.org</a><br>
> <a href="http://lists.scilab.org/mailman/listinfo/users" rel="noreferrer" target="_blank">http://lists.scilab.org/<wbr>mailman/listinfo/users</a><br>
--<br>
<br>
Tim Wescott<br>
<a href="http://www.wescottdesign.com" rel="noreferrer" target="_blank">www.wescottdesign.com</a><br>
Control & Communications systems, circuit & software design.<br>
Phone: <a href="tel:503.631.7815" value="+15036317815">503.631.7815</a><br>
Cell:  <a href="tel:503.349.8432" value="+15033498432">503.349.8432</a><br>
<br>
<br>
<br>
______________________________<wbr>_________________<br>
users mailing list<br>
<a href="mailto:users@lists.scilab.org">users@lists.scilab.org</a><br>
<a href="http://lists.scilab.org/mailman/listinfo/users" rel="noreferrer" target="_blank">http://lists.scilab.org/<wbr>mailman/listinfo/users</a><br>
</blockquote></div><br></div>