<div dir="ltr">Hi Florent (CC Scilab Users)<div><br></div><div>I cannot run the zcos model with my current Scilab 6.0.1 setup (and I haven't installed CPGE 1.6.3 either - is there a way you could simulate a loudspeaker without the need for CPGE??).</div><div><br></div><div>The bode plots you get is a function of the input + the loudspeaker model. We know that in principle the accelaration is equivalent to Loudspeaker Sound Pressure Level (SPL) response and it should show a flat area + roll off at both ends. I see that your plots don't do this.</div><div><br></div><div>The velocity is like an integration and should "shift" (or "tilt") the response by 6 dB.</div><div><br></div><div>The position is also like an integration and should further shift/tilt the reponse additionally 6 dB so that in the bandpass you get a 12 dB/octave slope.</div><div><br></div><div>Your current loudspeaker model looks OK (I haven't dug into the details of each block), so my guess is - the output depends on the input. Now that you presumably have a working loudspeaker model - would it then maybe make sense to generate a very simple model - e.g. just a resistor (i.e. not a bandpass - but something that behaves from DC to lightning as a flat curve) - play around with the input and get it to behave correctly?</div><div><br></div><div>Best regards,</div><div>Claus</div></div><div class="gmail_extra"><br><div class="gmail_quote">On Sat, Mar 10, 2018 at 9:51 AM, Claus Futtrup <span dir="ltr"><<a href="mailto:cfuttrup@gmail.com" target="_blank">cfuttrup@gmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr"><div>Hi Florent</div><div><br></div><div>Thank you for sharing your experiences with us. I don't speak but maybe 100 words in French and can't string together a sentence (but maybe the most elementary tourist-french). I looked up the CPGE in Atoms, but it looks French to me... <a href="https://atoms.scilab.org/toolboxes/CPGE/1.6.3/" target="_blank">https://atoms.scilab.org/<wbr>toolboxes/CPGE/1.6.3/</a></div><div><br></div><div>You give the result but no details to replicate, etc. I'm afraid I can't help.</div><div><br></div><div>Best regards,</div><div>Claus</div><div><br></div></div><div class="HOEnZb"><div class="h5"><div class="gmail_extra"><br><div class="gmail_quote">On Fri, Mar 9, 2018 at 10:29 PM, Florent <span dir="ltr"><<a href="mailto:florent.halgatte@gmail.com" target="_blank">florent.halgatte@gmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">Good morning,<br>
<br>
Here is an update of my "problem".<br>
<br>
First of all I had a problem of compatibility between Scilab/Xcos and the<br>
toolbox CPGE.<br>
<br>
Before I was using Scilab 6.0.1 and CPGE Version: 1.6.0.<br>
Now, with Scilab 5.4.1 and CPGE Version: 1.5.2, the Bode plot works. But it<br>
doesn't give the result expected...<br>
<br>
For the Displacement vs Frequency, a Low Pass behavior is expected.<br>
For the Velocity vs Frequency, a Band Pass behavior is expected.<br>
For the Acceleration vs Frequency, a High Pass behavior is expected (similar<br>
to the pressure response).<br>
<br>
And here is what is get:<br>
<br>
<<a href="http://mailinglists.scilab.org/file/t497760/bode_out.png" rel="noreferrer" target="_blank">http://mailinglists.scilab.or<wbr>g/file/t497760/bode_out.png</a>><br>
<div class="m_-6687403958122492579HOEnZb"><div class="m_-6687403958122492579h5"><br>
<br>
<br>
--<br>
Sent from: <a href="http://mailinglists.scilab.org/Scilab-users-Mailing-Lists-Archives-f2602246.html" rel="noreferrer" target="_blank">http://mailinglists.scilab.org<wbr>/Scilab-users-Mailing-Lists-<wbr>Archives-f2602246.html</a><br>
______________________________<wbr>_________________<br>
users mailing list<br>
<a href="mailto:users@lists.scilab.org" target="_blank">users@lists.scilab.org</a><br>
<a href="http://lists.scilab.org/mailman/listinfo/users" rel="noreferrer" target="_blank">http://lists.scilab.org/mailma<wbr>n/listinfo/users</a><br>
</div></div></blockquote></div><br></div>
</div></div></blockquote></div><br></div>