[Scilab-Dev] Scilab-5 and rendering a plot under linux

[Collette Yann]

Hello,

glxgears works fine (but a lot more slower than with dri enabled).

YC

Simone Mannori a écrit :
> On Fri, 2008-03-07 at 19:07 +0100, Collette Yann wrote:
>   
>> Hello,
>>
>> I've just performed some test with the ati and radeon driver.
>> If I disable the dri option (Load "dri") everything works fine for ati 
>> and radeon.
>>     
>
> OK. Good to know.
>
>   
>> If I enable the dri option, the plot command makes scilab hangs with the 
>> radeon driver and the ati driver.
>> So, the problem seems to be located somewhere around the xorg dri driver ?
>>
>>     
> Probably. We are investigating in this direction.
>
> Send us - please - the debugging information that I asked in the
> previous email.
>
> Thanks in advance for you collaboration.
>
> M. Simone Mannori
>
>   

-------------- next part --------------
A non-text attachment was scrubbed...
Name: glxinfo.txt.gz
Type: application/x-gzip
Size: 1383 bytes
Desc: not available
URL: <https://lists.scilab.org/pipermail/dev/attachments/20080308/cb2dee93/attachment.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: lspci.txt.gz
Type: application/x-gzip
Size: 482 bytes
Desc: not available
URL: <https://lists.scilab.org/pipermail/dev/attachments/20080308/cb2dee93/attachment-0001.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: xorg.conf.gz
Type: application/x-gzip
Size: 1071 bytes
Desc: not available
URL: <https://lists.scilab.org/pipermail/dev/attachments/20080308/cb2dee93/attachment-0002.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Xorg.0.log.gz
Type: application/x-gzip
Size: 9323 bytes
Desc: not available
URL: <https://lists.scilab.org/pipermail/dev/attachments/20080308/cb2dee93/attachment-0003.bin>