[Scilab-Dev] [Scilab-users] Issue on Scilab Compilation on Raspbery Pi
Stéphane Mottelet
stephane.mottelet at utc.fr
Thu May 7 16:02:48 CEST 2020
Le 07/05/2020 à 15:51, Chin Luh Tan a écrit :
> Hi Stephane,
>
> Thanks, I will give a try on that.
>
> As there are no repository for 2.2,
All versions of JoGL are available on the official site. E.g. latests
2.2.x is here:
https://jogamp.org/deployment/v2.2.4/archive/
> base on your experience in Mac, do we need to recompile the whole lib,
> or we could just use the binary/libs from the jogl web? If so, how
> should we place the libs and jar in the system?
in the scilab/thirdparty (for jars) and scilab/lib/thidparty (for jni libs)
> The previous Mac compilation the dylib were place in the thirdparty
> folder, but now as I am not using any thirparty from the scilab
> github, how should I get the scilab to refer to the locations?
Just uninstall the .deb JoGL package and the configure script will
hopefully find its way to the version you put in thirdparty folders.
S.
>
> Thanks again for advice.
>
> Regards,
> Chin Luh
>
>
> ---- On Thu, 07 May 2020 20:44:33 +0800 *Stéphane Mottelet
> <stephane.mottelet at utc.fr>* wrote ----
>
> Hi,
>
> Le 07/05/2020 à 14:29, Chin Luh Tan a écrit :
>
> Hi Stephane,
>
> I applied the patch Change17530
> <https://antispam.utc.fr/proxy/2/c3RlcGhhbmUubW90dGVsZXRAdXRjLmZy/antispam.utc.fr/proxy/2/c3RlcGhhbmUubW90dGVsZXRAdXRjLmZy/codereview.scilab.org/17530> but
> not the Change21438
> <https://antispam.utc.fr/proxy/2/c3RlcGhhbmUubW90dGVsZXRAdXRjLmZy/antispam.utc.fr/proxy/2/c3RlcGhhbmUubW90dGVsZXRAdXRjLmZy/codereview.scilab.org/21438>,
> as the original configure.ac still searching for Jogl 2.2.
>
> I tried the path set 5 and 8 from changes 17530, both compile
> the scilab with minor modification on the fop (to enable
> detection).
>
> As I am trying to compile in Arm environment, I have to
> install the 3rd parties from apt-get, and with those libs
> installed, "configure" was able to "pass" for the make.
>
> i think the issue is on the jogl now? The parts which
> differentiate 2.2. and 2.3 were mentioned in the configure.ac:
>
> AC_JAVA_CHECK_JAR([jogl2],[javax.media.opengl.glu.GLUnurbs],[Scilab
> 3D rendering - Version 2.0], [], [], [2.2])
> AC_JAVA_CHECK_JAR([jogl2],[jogamp.opengl.x11.glx.GLX],[Scilab
> 3D rendering - Version 2.3], [], [], 2.3)
>
> On the source point of view, 2.3 version changed all class
> headers, but there are surely may other changes in the
> implementation.
>
> AC_JAVA_CHECK_JAR([gluegen2-rt],[jogamp.common.os.MachineDescriptionRuntime],[Scilab
> 3D rendering])
> AC_JAVA_CHECK_JAR([gluegen2-rt],[com.jogamp.common.os.Platform],[Scilab
> 3D rendering])
>
> Should I use the Jogl2.2 for the compilation and use the
> original configure.ac?
>
> I think so. Just to test that the problem still occurs (or not)
> with 2.2.
>
> S.
>
>
> Thanks.
>
> Regards,
> Chin Luh
>
>
>
>
> ---- On Thu, 07 May 2020 01:42:51 +0800 *Stéphane Mottelet
> <stephane.mottelet at utc.fr> <mailto:stephane.mottelet at utc.fr>*
> wrote ----
>
> If you apply the JoGL patch then third parties have to be
> updated as well. I think you did it. But since this patch
> is not needed for Linux, I would try to compile with
> previous version.
>
> S.
>
> Le 6 mai 2020 à 18:52, Chin Luh Tan
> <chinluh.tan at bytecode-asia.com
> <mailto:chinluh.tan at bytecode-asia.com>> a écrit :
>
>
> sorry pls ignore the previous incomplete email which
> has been accidentally sent:
>
> I tried to compile scilab 6.1 under raspberry pi 4,
> and the compilation completed with scilab lauched with
> following messages:
>
>
> Caught handled GLException: EGLGLXDrawableFactory
> - Could not initialize shared resources for
> EGLGraphicsDevice[type .egl, v1.4.0, connection
> :0.0, unitID 0, handle 0xffffffffa8b148f0, owner
> true, ResourceToolkitLock[obj 0xb29daf, isOwner
> true, <1fa6506, f15db4>[count 1, qsz 0, owner
> <main-SharedResourceRunner>]]] on thread
> main-SharedResourceRunner
> [0]:
> jogamp.opengl.egl.EGLDrawableFactory$SharedResourceImplementation.createSharedResource(EGLDrawableFactory.java:518)
> [1]:
> jogamp.opengl.SharedResourceRunner.run(SharedResourceRunner.java:353)
> [2]: java.lang.Thread.run(Thread.java:748)
> Caused[0] by NoSuchMethodError:
> java.nio.IntBuffer.rewind()Ljava/nio/IntBuffer; on
> thread main-SharedResourceRunner
> [0]:
> com.jogamp.common.nio.Buffers.newDirectIntBuffer(Buffers.java:146)
> [1]:
> com.jogamp.common.nio.Buffers.newDirectIntBuffer(Buffers.java:150)
> [2]:
> com.jogamp.common.nio.Buffers.newDirectIntBuffer(Buffers.java:154)
> [3]:
> jogamp.opengl.egl.EGLGraphicsConfiguration.EGLConfig2Capabilities(EGLGraphicsConfiguration.java:221)
> [4]:
> jogamp.opengl.egl.EGLGraphicsConfigurationFactory.eglConfigs2GLCaps(EGLGraphicsConfigurationFactory.java:481)
> [5]:
> jogamp.opengl.egl.EGLDrawableFactory.getAvailableEGLConfigs(EGLDrawableFactory.java:962)
> [6]:
> jogamp.opengl.egl.EGLDrawableFactory.access$800(EGLDrawableFactory.java:88)
> [7]:
> jogamp.opengl.egl.EGLDrawableFactory$SharedResourceImplementation.mapAvailableEGLESConfig(EGLDrawableFactory.java:679)
> [8]:
> jogamp.opengl.egl.EGLDrawableFactory$SharedResourceImplementation.createEGLSharedResourceImpl(EGLDrawableFactory.java:613)
> [9]:
> jogamp.opengl.egl.EGLDrawableFactory$SharedResourceImplementation.createSharedResource(EGLDrawableFactory.java:516)
> [10]:
> jogamp.opengl.SharedResourceRunner.run(SharedResourceRunner.java:353)
> [11]: java.lang.Thread.run(Thread.java:748)
> Caught handled GLException: X11GLXDrawableFactory
> - Could not initialize shared resources for
> X11GraphicsDevice[type .x11, connection :0.0,
> unitID 0, handle 0x0, owner false,
> ResourceToolkitLock[obj 0x1f4f0f8, isOwner false,
> <1c08638, 40f0>[count 0, qsz 0, owner <NULL>]]] on
> thread main-SharedResourceRunner
> [0]:
> jogamp.opengl.x11.glx.X11GLXDrawableFactory$SharedResourceImplementation.createSharedResource(X11GLXDrawableFactory.java:306)
> [1]:
> jogamp.opengl.SharedResourceRunner.run(SharedResourceRunner.java:353)
> [2]: java.lang.Thread.run(Thread.java:748)
>
>
> while I am still able to launch the Scilab and perform
> most operation, however, when I tried to plot a
> figure, i get:
>
>
> java.lang.reflect.InvocationTargetException
> at
> java.awt.EventQueue.invokeAndWait(EventQueue.java:1349)
> at
> java.awt.EventQueue.invokeAndWait(EventQueue.java:1324)
> at
> javax.swing.SwingUtilities.invokeAndWait(SwingUtilities.java:1353)
> at
> org.scilab.modules.gui.SwingView.updateObject(Unknown
> Source)
> at
> org.scilab.modules.graphic_objects.graphicController.GraphicController$2.run(Unknown
> Source)
> at
> org.scilab.modules.graphic_objects.graphicController.GraphicController.objectUpdate(Unknown
> Source)
> at
> org.scilab.modules.graphic_objects.graphicController.GraphicController.setGraphicObjectRelationship(Unknown
> Source)
> at
> org.scilab.modules.graphic_objects.builder.Builder.cloneAxesModel(Unknown
> Source)
> at
> org.scilab.modules.graphic_objects.builder.Builder.createNewFigureWithAxes(Unknown
> Source)
> Caused by: com.jogamp.opengl.GLException: Profile
> GL_DEFAULT is not available on
> X11GraphicsDevice[type .x11, connection :0.0,
> unitID 0, handle 0x0, owner false,
> ResourceToolkitLock[obj 0x1f4f0f8, isOwner false,
> <1c08638, 40f0>[count 0, qsz 0, owner <NULL>]]],
> but: []
> at
> com.jogamp.opengl.GLProfile.get(GLProfile.java:991)
> at
> com.jogamp.opengl.GLProfile.getDefault(GLProfile.java:722)
> at
> com.jogamp.opengl.awt.GLJPanel.<init>(GLJPanel.java:363)
> at
> com.jogamp.opengl.awt.GLJPanel.<init>(GLJPanel.java:337)
> at
> com.jogamp.opengl.awt.GLJPanel.<init>(GLJPanel.java:325)
> at
> org.scilab.modules.gui.bridge.canvas.SwingScilabCanvasImpl$SafeGLJPanel.<init>(Unknown
> Source)
> at
> org.scilab.modules.gui.bridge.canvas.SwingScilabCanvasImpl$SafeGLJPanel.<init>(Unknown
> Source)
> at
> org.scilab.modules.gui.bridge.canvas.SwingScilabCanvasImpl.createOpenGLComponent(Unknown
> Source)
>
> .
> Any suggestion what I need to change for the compilation?
>
> I compile scilab with:
> 1. gcc, g++, gfortran v 8, and also another try on v9
> 2. openjdk-8-jdk
> 3. Tried Raspbian, Ubuntu for Pi 18.04 , same issue.
> 4. Applied jogl 2.3.2 patch.
>
> Thanks.
>
> Rgds,
> CL
>
>
>
>
>
>
> ---- On Thu, 07 May 2020 00:45:23 +0800 *Chin Luh Tan
> <chinluh.tan at bytecode-asia.com
> <mailto:chinluh.tan at bytecode-asia.com>>* wrote ----
>
> Hi,
>
> I tried to compile scilab 6.1 under raspberry pi
> 4, and the compilation completed with scilab
> lauched with following messages:
>
>
> _______________________________________________
> users mailing list
> users at lists.scilab.org
> <mailto:users at lists.scilab.org>
> http://lists.scilab.org/mailman/listinfo/users
> <https://antispam.utc.fr/proxy/2/c3RlcGhhbmUubW90dGVsZXRAdXRjLmZy/antispam.utc.fr/proxy/1/c3RlcGhhbmUubW90dGVsZXRAdXRjLmZy/lists.scilab.org/mailman/listinfo/users>
>
>
>
>
> _______________________________________________
> dev mailing list
> dev at lists.scilab.org <mailto:dev at lists.scilab.org>
> https://antispam.utc.fr/proxy/1/c3RlcGhhbmUubW90dGVsZXRAdXRjLmZy/lists.scilab.org/mailman/listinfo/dev
> <https://antispam.utc.fr/proxy/2/c3RlcGhhbmUubW90dGVsZXRAdXRjLmZy/antispam.utc.fr/proxy/2/c3RlcGhhbmUubW90dGVsZXRAdXRjLmZy/antispam.utc.fr/proxy/1/c3RlcGhhbmUubW90dGVsZXRAdXRjLmZy/lists.scilab.org/mailman/listinfo/dev>
>
> _______________________________________________
> dev mailing list
> dev at lists.scilab.org <mailto:dev at lists.scilab.org>
> http://lists.scilab.org/mailman/listinfo/dev
> <https://antispam.utc.fr/proxy/1/c3RlcGhhbmUubW90dGVsZXRAdXRjLmZy/lists.scilab.org/mailman/listinfo/dev>
>
>
>
>
>
> _______________________________________________
> dev mailing list
> dev at lists.scilab.org <mailto:dev at lists.scilab.org>
> https://antispam.utc.fr/proxy/1/c3RlcGhhbmUubW90dGVsZXRAdXRjLmZy/lists.scilab.org/mailman/listinfo/dev <https://antispam.utc.fr/proxy/2/c3RlcGhhbmUubW90dGVsZXRAdXRjLmZy/antispam.utc.fr/proxy/1/c3RlcGhhbmUubW90dGVsZXRAdXRjLmZy/lists.scilab.org/mailman/listinfo/dev>
>
> --
> Stéphane Mottelet
> Ingénieur de recherche
> EA 4297 Transformations Intégrées de la Matière Renouvelable
> Département Génie des Procédés Industriels
> Sorbonne Universités - Université de Technologie de Compiègne
> CS 60319, 60203 Compiègne cedex
> Tel : +33(0)344234688
> http://www.utc.fr/~mottelet <https://antispam.utc.fr/proxy/1/c3RlcGhhbmUubW90dGVsZXRAdXRjLmZy/www.utc.fr/~mottelet>
>
> _______________________________________________
> dev mailing list
> dev at lists.scilab.org
> http://lists.scilab.org/mailman/listinfo/dev
>
>
>
>
> _______________________________________________
> dev mailing list
> dev at lists.scilab.org
> https://antispam.utc.fr/proxy/1/c3RlcGhhbmUubW90dGVsZXRAdXRjLmZy/lists.scilab.org/mailman/listinfo/dev
--
Stéphane Mottelet
Ingénieur de recherche
EA 4297 Transformations Intégrées de la Matière Renouvelable
Département Génie des Procédés Industriels
Sorbonne Universités - Université de Technologie de Compiègne
CS 60319, 60203 Compiègne cedex
Tel : +33(0)344234688
http://www.utc.fr/~mottelet
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.scilab.org/pipermail/dev/attachments/20200507/6e444f5c/attachment.htm>
More information about the dev
mailing list