[scilab-Users] wired problem of the edit tab

[Mathieu Dubois]

On 09/27/2010 04:51 PM, Peng Du wrote:
> Hi. I tried set the figure properties via commands. But similar error 
> messages are reported:
>
> I added
>
> p=gcf();
> p.figure_name="foo";
>
> Which are excerpt from the example of online documents. And the 
> console says:
>
> error 21
> invalid index
> at line 4 of function generic_i_h called by:
> line 2 of function %c_i_h called by:
> p.figure_name="foo";
Very stange... Looks like an overloading issue... Did you clear all your 
variables?
>
> Best regards,
>
> Peng
>
> On 27 September 2010 15:15, Peng Du <eddy.pdu at gmail.com 
> <mailto:eddy.pdu at gmail.com>> wrote:
>
>     Oh dear... scilab suddenly fixed itself, after I did absolutely
>     nothing..
>
>     It is nice to have it working, however my fear is it will come
>     back anytime without a notice..
>
>     Thanks very much Mathieu, I will update this thread if anything
>     happens again.
>
>     Regards,
>
>     Peng
>
>
>     On 27 September 2010 14:44, Mathieu Dubois
>     <mathieu.dubois at limsi.fr <mailto:mathieu.dubois at limsi.fr>> wrote:
>
>         On 09/27/2010 03:20 PM, Peng Du wrote:
>>         Hi Mathieu,
>>
>>         I can see the menu after clicking "Edit", however, nothing
>>         shows up except for those error messages when selecting
>>         either "figure properties" or "Axes properties". I also tried
>>         using "entity picker", but still, it reports errors when I
>>         pick anything on the graph.
>         Sad... which version are you using? You can try the classical
>         tip: update your drivers. If the problem persists you should
>         fill a bug report...
>
>         On the bright side if you need to change graphical properties
>         (changing colours, line style, and so on), you can do
>         everything with commands. If you are not familiar with the
>         graphical API you might look at "help graphical_entities". It
>         is a bit hard but it allows to do very nice plots. There are
>         lots of help messages in the archive, too.
>
>         If you have a specific request, don't hesitate...
>
>         Good luck.
>
>>
>>         Thanks.
>>
>>         Peng
>>
>>         On 27 September 2010 14:10, Mathieu Dubois
>>         <mathieu.dubois at limsi.fr <mailto:mathieu.dubois at limsi.fr>> wrote:
>>
>>             Hello,
>>
>>
>>             On 09/25/2010 01:54 AM, Peng Du wrote:
>>
>>                 Hi.
>>
>>                 When I click the "edit" tab of the graphic window, no
>>                 new window shows up. Instead the console reports:
>>
>>             "Edit" normally shows a menu... Do you see the menu or not?
>>
>>
>>                 !--error 21
>>                 invalid index
>>                 at line 3 of function %h_e called by:
>>                 line 6 of function getparfig called by:
>>                 line 21 of function TK_send_handles_list called by:
>>                 line 40 of function ged called by:
>>                 ged(4,0)
>>                 while executing a callback
>>
>>                 Does anyone know why this is happening and how to fix
>>                 it? Thanks a lot.
>>
>>             I remember I had a problem under some old version of
>>             scilab (like 5.1.1) when cliking on "Figure
>>             properties"... The workaround was to click on "Axes
>>             properties".
>>
>>             By the way under scilab 5.3 beta 3 clicking on
>>             "Edit->Figure properties" seems to hang scilab... I have
>>             attached the bug report...
>>
>>             Mathieu
>>
>>
>
>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.scilab.org/pipermail/users/attachments/20100927/8e4555e1/attachment.htm>