[Scilab-users] Problems using write_csv and/or csvWrite with Scilab 5.4.0
Daniel Buccoliero
dbu at microshade.dk
Thu Mar 7 15:46:48 CET 2013
To whom it may concern
When I run a calculation in Scilab 5.3.2, I round the results and manipulate them to maintain only two or three decimals. Then I use the write_csv command to write the results to a file that Excel can read. All works very nicely, the results would look like this, 0.146
When running the exact same calculations in Scilab 5.4.0 (with the exact same scripts) however, the outcome has not only several decimals, but the numbers come with an imaginary part as well, which by the way is 0, i.e. the results look like this, 0.14599999999999 + 0i.
I've tried to use the newer version of write_csv, namely csvWrite, but without any succes.
Can anybody help me?
________________________
[Beskrivelse: MicroShade logo]
Daniel Buccoliero
Software Engineer
MicroShade A/S
Gregersensvej 1F
DK-2630 Taastrup
Denmark
Phone: +45 22 14 48 49
Email: dbu at microshade.dk<mailto:dbu at microshade.dk>
www.microshade.dk<http://www.microshade.dk>
This e-mail may contain confidential information and is intended solely for the addressee, and any disclosure of this information is strictly prohibited and may be unlawful. If you have received this e-mail by mistake, please notify us immediately and delete this mail.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.scilab.org/pipermail/users/attachments/20130307/a0d09be4/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 3828 bytes
Desc: image001.png
URL: <https://lists.scilab.org/pipermail/users/attachments/20130307/a0d09be4/attachment.png>
More information about the users
mailing list