[Scilab-users] GUI Builder 4.0.1 for Scilab 6.0

[Frieder Nikolaisen]

Dear Community, 

I am using the GUI Builder again (last time
Oktobre 2016), now with Scilab 6.0.0. 

I started to Design the
interface, generated the GUI. Had the GUI run and wanted to reload it.
But: 

--> guibuilder
operation -: Warning adding a matrix with the
empty matrix will give an empty matrix result.
operation +: Warning
adding a matrix with the empty matrix will give an empty matrix
result.
at line 60 of function guigetfile 
at line 4 of function
openfile 
at line 9 of function open_existing_gui 

':': Wrong type for
argument 1: Real scalar expected. 

And with the old version I am used
to (but its still desigend with Scilab 6): 

START GUI Builder 3.0 for
Scilab 5.5
 Load macros
 Load help
 Type "guibuilder" to start the
GUI

-->guibuilder
 !--error 21 
ungültiger Index.
at line 8 of function
openfile called by : 
at line 9 of function open_existing_gui called by
: 
= gcbo; end;gcbo =
getcallbackobject(118);open_existing_gui(handles);if exists("%oldgcbo")
then gcbo = %oldgcbo; else clear gcbo; end
while executing a callback


The file is attached. 

Scilab 5.5 and 6 open the programm with save
and run. But not with the Builder. 

WHATS WRONG? 

Best regards


Frieder 

 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.scilab.org/pipermail/users/attachments/20170504/d5823225/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Simulation_v1.1.sce
Type: text/x-c++
Size: 4117 bytes
Desc: not available
URL: <https://lists.scilab.org/pipermail/users/attachments/20170504/d5823225/attachment.bin>