[Scilab-users] c link (mingw)
Stéphane Mottelet
stephane.mottelet at utc.fr
Fri Sep 27 09:58:51 CEST 2019
Great ! Most of the time, the problem is due to a first install of
MingGW without having installed GCC first (it can be years ago so that
you barely remember). After this, even after uninstalling the package,
there is still some file in SCIHOME that make believe MinGXW install
script that libraries do not have to be built again. The problem is that
this file is likely created at first startup of the package, even if
GCC is not installed. A little fix in the startup script seems necessary...
S.
Le 27/09/2019 à 09:42, Jakub Kopac a écrit :
> Dear Stephane,
>
> after your last advice, now everything works.
> Uninstalling Mingw and deleting SCIHOME, then reinstall Mingw and all
> work as expected!
>
> Many thanks!
>
> BR
>
> JK
>
>
> pi 27. 9. 2019 o 9:18 Stéphane Mottelet <stephane.mottelet at utc.fr
> <mailto:stephane.mottelet at utc.fr>> napísal(a):
>
>
>
> Le 27 sept. 2019 à 06:30, Jakub Kopac <kopac.jakub at gmail.com
> <mailto:kopac.jakub at gmail.com>> a écrit :
>
>> I checked it: Scilab is 64 bit, GCC is 64 bit (6.2.0) and was
>> installed in correct order (gcc first, then Mingw from ATOMS).
>> I uninstal and install again Mingw from ATOMS, but I do not see
>> transcript as you wrote.
>>
>
> I suppose that compilation still doesn’t work ? I would suggest
> that after uninstalling Mingw atoms package you delete your user
> Scilab folder (SCIHOME) then reinstall.
>
> S.
>
>> Sometimes thinks just do not work as expected, so thank you for
>> your help!
>>
>> BR
>>
>> JK
>>
>>
>> št 26. 9. 2019 o 14:53 <stephane.mottelet at utc.fr
>> <mailto:stephane.mottelet at utc.fr>> napísal(a):
>>
>> I think that your installation of mingw toolbox is broken, as
>> the error
>>
>>> !C:\Users\jkopac\AppData\Roaming\Scilab\scilab-6.0.2\mingwlib_x64/liblibf2c.a:
>>> file not recognized: File format not recognized !
>>> !
>>
>>
>> looks like an architecture mismatch (32 vs 64 bits). When you
>> install the gcc package *before* installing the mingw atoms
>> package (it has to be done in that order) , when you exit the
>> relauch Scilab, during the first startup of mingw package,
>> some libraries are converted (transcript below):
>>
>> Mingw Compiler support for Scilab
>> Load macros
>> Converting Libraries.
>> Build libblasplus.a
>> Build liblibf2c.a
>> Build libcore.a
>> Build libcore_f.a
>> Build liblapack.a
>> Build liboutput_stream.a
>> Build libdynamic_link.a
>> Build libinteger.a
>> Build liboptimization_f.a
>> Build liblibjvm.a
>> Build libscilocalization.a
>> Build liblinpack_f.a
>> Build libcall_scilab.a
>> Build libtime.a
>> Build libapi_scilab.a
>> Build liblibintl.a
>> Build libast.a
>> Build libfileio.a
>> Build libio.a
>> Build libstring.a
>> Build libthreads.a
>> Build libsciconsole.a
>> Build libscilab_windows.a
>> Build liblibmex.a
>> Build libscicos.a
>> Build libscicos-cli.a
>> Build libscicos_f.a
>> Build libscicos_blocks.a
>> Build libscicos_blocks-cli.a
>> Build libscicos_blocks_f.a
>> Load help
>>
>> If you have never seen this, I think that there is something
>> wrong. Please also check that you have a 64bit Scilab.
>>
>> S.
>>
>>
>>
>> Jakub Kopac <kopac.jakub at gmail.com
>> <mailto:kopac.jakub at gmail.com>> a écrit :
>>
>>> I tried example from the call help page.
>>> results from ilib_build help page:
>>> Generate a gateway file
>>> Generate a loader file
>>> Generate a Makefile
>>> Running the makefile
>>> Compilation of build_c.obj
>>> Compilation of build_c.obj
>>> Compilation of build_c.obj
>>> Compilation of fun1.obj
>>> Compilation of fun2.obj
>>> Compilation of sci_fun1.obj
>>> Building shared library (be patient)
>>>
>>> !------------- Compile file build_c.cpp -------------- !
>>> ! !
>>> !x86_64-w64-mingw32-g++.exe -c -DWIN32 -DSTRICT -DFORDLL
>>> -D_MSC_VER -I"C:/NONINS~1/SCILAB~1.2/libs/MALLOC/includes"
>>> -I"C:/NONINS~1/SCILAB~1.2/libs/f2c" -I"C:/NONINS~1/S!
>>> !CILAB~1.2/libs/intl"
>>> -I"C:/NONINS~1/SCILAB~1.2/modules/core/includes"
>>> -I"C:/NONINS~1/SCILAB~1.2/modules/api_scilab/includes"
>>> -I"C:/NONINS~1/SCILAB~1.2/modules/call_sci!
>>> !lab/includes"
>>> -I"C:/NONINS~1/SCILAB~1.2/modules/output_stream/includes"
>>> -I"C:/NONINS~1/SCILAB~1.2/modules/jvm/includes"
>>> -I"C:/NONINS~1/SCILAB~1.2/modules/localization/!
>>> !includes"
>>> -I"C:/NONINS~1/SCILAB~1.2/modules/dynamic_link/includes"
>>> -I"C:/NONINS~1/SCILAB~1.2/modules/mexlib/includes"
>>> -I"C:/NONINS~1/SCILAB~1.2/modules/time/includes" !
>>> !-I"C:/NONINS~1/SCILAB~1.2/modules/windows_tools/includes"
>>> -I"C:/NONINS~1/SCILAB~1.2/modules/threads/includes"
>>> -I"C:/NONINS~1/SCILAB~1.2/modules/ast/includes/ast" -I"C:!
>>> !/NONINS~1/SCILAB~1.2/modules/ast/includes/exps"
>>> -I"C:/NONINS~1/SCILAB~1.2/modules/ast/includes/operations"
>>> -I"C:/NONINS~1/SCILAB~1.2/modules/ast/includes/parse" -I"C:/!
>>> !NONINS~1/SCILAB~1.2/modules/ast/includes/symbol"
>>> -I"C:/NONINS~1/SCILAB~1.2/modules/ast/includes/system_env"
>>> -I"C:/NONINS~1/SCILAB~1.2/modules/ast/includes/types" -I"C:!
>>> !/NONINS~1/SCILAB~1.2/modules/ast/includes/analysis"
>>> -I"C:/NONINS~1/SCILAB~1.2/modules/string/includes"
>>> -I"C:/NONINS~1/SCILAB~1.2/modules/console/includes" -m64
>>> -D__SCI!
>>> !LAB_TOOLBOX__ -DNDEBUG build_c.cpp !
>>> ! !
>>> !build_c.cpp: In function 'int build_c(wchar_t*)':
>>> !
>>> ! !
>>> !build_c.cpp:11:5: warning: 'int build_c(wchar_t*)'
>>> redeclared without dllimport attribute: previous dllimport
>>> ignored [-Wattributes] !
>>> ! !
>>> ! int build_c(wchar_t* _pwstFuncName) !
>>> ! !
>>> ! ^~~~~~~ !
>>> ! !
>>> !------------- Compile file fun1.c -------------- !
>>> ! !
>>> !x86_64-w64-mingw32-gcc.exe -c -DWIN32 -DSTRICT -DFORDLL
>>> -D_MSC_VER -I"C:/NONINS~1/SCILAB~1.2/libs/MALLOC/includes"
>>> -I"C:/NONINS~1/SCILAB~1.2/libs/f2c" -I"C:/NONINS~1/S!
>>> !CILAB~1.2/libs/intl"
>>> -I"C:/NONINS~1/SCILAB~1.2/modules/core/includes"
>>> -I"C:/NONINS~1/SCILAB~1.2/modules/api_scilab/includes"
>>> -I"C:/NONINS~1/SCILAB~1.2/modules/call_sci!
>>> !lab/includes"
>>> -I"C:/NONINS~1/SCILAB~1.2/modules/output_stream/includes"
>>> -I"C:/NONINS~1/SCILAB~1.2/modules/jvm/includes"
>>> -I"C:/NONINS~1/SCILAB~1.2/modules/localization/!
>>> !includes"
>>> -I"C:/NONINS~1/SCILAB~1.2/modules/dynamic_link/includes"
>>> -I"C:/NONINS~1/SCILAB~1.2/modules/mexlib/includes"
>>> -I"C:/NONINS~1/SCILAB~1.2/modules/time/includes" !
>>> !-I"C:/NONINS~1/SCILAB~1.2/modules/windows_tools/includes"
>>> -I"C:/NONINS~1/SCILAB~1.2/modules/threads/includes"
>>> -I"C:/NONINS~1/SCILAB~1.2/modules/ast/includes/ast" -I"C:!
>>> !/NONINS~1/SCILAB~1.2/modules/ast/includes/exps"
>>> -I"C:/NONINS~1/SCILAB~1.2/modules/ast/includes/operations"
>>> -I"C:/NONINS~1/SCILAB~1.2/modules/ast/includes/parse" -I"C:/!
>>> !NONINS~1/SCILAB~1.2/modules/ast/includes/symbol"
>>> -I"C:/NONINS~1/SCILAB~1.2/modules/ast/includes/system_env"
>>> -I"C:/NONINS~1/SCILAB~1.2/modules/ast/includes/types" -I"C:!
>>> !/NONINS~1/SCILAB~1.2/modules/ast/includes/analysis"
>>> -I"C:/NONINS~1/SCILAB~1.2/modules/string/includes"
>>> -I"C:/NONINS~1/SCILAB~1.2/modules/console/includes" -m64
>>> -D__SCI!
>>> !LAB_TOOLBOX__ -DNDEBUG fun1.c !
>>> ! !
>>> !------------- Compile file fun2.c -------------- !
>>> ! !
>>> !x86_64-w64-mingw32-gcc.exe -c -DWIN32 -DSTRICT -DFORDLL
>>> -D_MSC_VER -I"C:/NONINS~1/SCILAB~1.2/libs/MALLOC/includes"
>>> -I"C:/NONINS~1/SCILAB~1.2/libs/f2c" -I"C:/NONINS~1/S!
>>> !CILAB~1.2/libs/intl"
>>> -I"C:/NONINS~1/SCILAB~1.2/modules/core/includes"
>>> -I"C:/NONINS~1/SCILAB~1.2/modules/api_scilab/includes"
>>> -I"C:/NONINS~1/SCILAB~1.2/modules/call_sci!
>>> !lab/includes"
>>> -I"C:/NONINS~1/SCILAB~1.2/modules/output_stream/includes"
>>> -I"C:/NONINS~1/SCILAB~1.2/modules/jvm/includes"
>>> -I"C:/NONINS~1/SCILAB~1.2/modules/localization/!
>>> !includes"
>>> -I"C:/NONINS~1/SCILAB~1.2/modules/dynamic_link/includes"
>>> -I"C:/NONINS~1/SCILAB~1.2/modules/mexlib/includes"
>>> -I"C:/NONINS~1/SCILAB~1.2/modules/time/includes" !
>>> !-I"C:/NONINS~1/SCILAB~1.2/modules/windows_tools/includes"
>>> -I"C:/NONINS~1/SCILAB~1.2/modules/threads/includes"
>>> -I"C:/NONINS~1/SCILAB~1.2/modules/ast/includes/ast" -I"C:!
>>> !/NONINS~1/SCILAB~1.2/modules/ast/includes/exps"
>>> -I"C:/NONINS~1/SCILAB~1.2/modules/ast/includes/operations"
>>> -I"C:/NONINS~1/SCILAB~1.2/modules/ast/includes/parse" -I"C:/!
>>> !NONINS~1/SCILAB~1.2/modules/ast/includes/symbol"
>>> -I"C:/NONINS~1/SCILAB~1.2/modules/ast/includes/system_env"
>>> -I"C:/NONINS~1/SCILAB~1.2/modules/ast/includes/types" -I"C:!
>>> !/NONINS~1/SCILAB~1.2/modules/ast/includes/analysis"
>>> -I"C:/NONINS~1/SCILAB~1.2/modules/string/includes"
>>> -I"C:/NONINS~1/SCILAB~1.2/modules/console/includes" -m64
>>> -D__SCI!
>>> !LAB_TOOLBOX__ -DNDEBUG fun2.c !
>>> ! !
>>> !------------- Compile file sci_fun1.c -------------- !
>>> ! !
>>> !x86_64-w64-mingw32-gcc.exe -c -DWIN32 -DSTRICT -DFORDLL
>>> -D_MSC_VER -I"C:/NONINS~1/SCILAB~1.2/libs/MALLOC/includes"
>>> -I"C:/NONINS~1/SCILAB~1.2/libs/f2c" -I"C:/NONINS~1/S!
>>> !CILAB~1.2/libs/intl"
>>> -I"C:/NONINS~1/SCILAB~1.2/modules/core/includes"
>>> -I"C:/NONINS~1/SCILAB~1.2/modules/api_scilab/includes"
>>> -I"C:/NONINS~1/SCILAB~1.2/modules/call_sci!
>>> !lab/includes"
>>> -I"C:/NONINS~1/SCILAB~1.2/modules/output_stream/includes"
>>> -I"C:/NONINS~1/SCILAB~1.2/modules/jvm/includes"
>>> -I"C:/NONINS~1/SCILAB~1.2/modules/localization/!
>>> !includes"
>>> -I"C:/NONINS~1/SCILAB~1.2/modules/dynamic_link/includes"
>>> -I"C:/NONINS~1/SCILAB~1.2/modules/mexlib/includes"
>>> -I"C:/NONINS~1/SCILAB~1.2/modules/time/includes" !
>>> !-I"C:/NONINS~1/SCILAB~1.2/modules/windows_tools/includes"
>>> -I"C:/NONINS~1/SCILAB~1.2/modules/threads/includes"
>>> -I"C:/NONINS~1/SCILAB~1.2/modules/ast/includes/ast" -I"C:!
>>> !/NONINS~1/SCILAB~1.2/modules/ast/includes/exps"
>>> -I"C:/NONINS~1/SCILAB~1.2/modules/ast/includes/operations"
>>> -I"C:/NONINS~1/SCILAB~1.2/modules/ast/includes/parse" -I"C:/!
>>> !NONINS~1/SCILAB~1.2/modules/ast/includes/symbol"
>>> -I"C:/NONINS~1/SCILAB~1.2/modules/ast/includes/system_env"
>>> -I"C:/NONINS~1/SCILAB~1.2/modules/ast/includes/types" -I"C:!
>>> !/NONINS~1/SCILAB~1.2/modules/ast/includes/analysis"
>>> -I"C:/NONINS~1/SCILAB~1.2/modules/string/includes"
>>> -I"C:/NONINS~1/SCILAB~1.2/modules/console/includes" -m64
>>> -D__SCI!
>>> !LAB_TOOLBOX__ -DNDEBUG sci_fun1.c !
>>> ! !
>>> !------------- Link files -------------- !
>>> ! !
>>> !x86_64-w64-mingw32-g++.exe --shared build_c.o fun1.o fun2.o
>>> sci_fun1.o -std=c++11 -L"c:\program
>>> files\gcc\x86_64-w64-mingw32\lib"
>>> -LC:\Users\jkopac\AppData\Roaming\Sci!
>>> !lab\scilab-6.0.2\mingwlib_x64 -lgfortran -lblasplus
>>> -llibf2c -lcore -lcore_f -llapack -loutput_stream
>>> -ldynamic_link -linteger -loptimization_f -llibjvm
>>> -lscilocalizat!
>>> !ion -llinpack_f -lcall_scilab -ltime -lapi_scilab -llibintl
>>> -last -lfileio -lio -lstring -lthreads -lsciconsole
>>> -lscilab_windows -llibmex -o build_c.dll -Wl,--out-im!
>>> !plib=build_c.a -Wl,--export-all-symbols
>>> -Wl,--enable-auto-import !
>>> ! !
>>> !C:\Users\jkopac\AppData\Roaming\Scilab\scilab-6.0.2\mingwlib_x64/liblibf2c.a:
>>> file not recognized: File format not recognized !
>>> ! !
>>> !collect2.exe: error: ld returned 1 exit status !
>>> ! !
>>> !Makelib:127: recipe for target 'build_c.dll' failed
>>> !
>>> ! !
>>> !make: *** [build_c.dll] Error 1 !
>>> at line 25 of function dlwCompile (
>>> C:\NONINS~1\SCILAB~1.2\contrib\mingw\010~1.5\macros\windows\dlwCompile.sci
>>> line 34 )
>>> at line 70 of function ilib_compile (
>>> C:\NONINSTALL\scilab-6.0.2\modules\dynamic_link\macros\ilib_compile.sci
>>> line 86 )
>>> at line 125 of function ilib_build (
>>> C:\NONINSTALL\scilab-6.0.2\modules\dynamic_link\macros\ilib_build.sci
>>> line 138 )
>>> at line 78 of executed file
>>> C:\Users\jkopac\Documents\==sukromne==\NON BALAST\SciLab\c
>>> experiment\z helpu 2\test_help_ilib_buildl.sce
>>>
>>> ilib_compile: Error while executing Makelib.
>>>
>>> BR
>>>
>>> JK
>>>
>>> št 26. 9. 2019 o 7:53 Stéphane Mottelet
>>> <stephane.mottelet at utc.fr <mailto:stephane.mottelet at utc.fr>>
>>> napísal(a):
>>>
>>> Which example of the doc did you run ? Did you try the
>>> examples of ilib_build page ? I consider them as a
>>> references because they compile full gateways.
>>> S.
>>>
>>> Le 26 sept. 2019 à 06:16, Jakub Kopac
>>> <kopac.jakub at gmail.com <mailto:kopac.jakub at gmail.com>> a
>>> écrit :
>>>> Hello,
>>>> I downloaded and instaled gcc-6.2.0-64.exe
>>>>
>>>> BR
>>>>
>>>> JK
>>>>
>>>> st 25. 9. 2019 o 21:56 Stéphane Mottelet
>>>> <stephane.mottelet at utc.fr
>>>> <mailto:stephane.mottelet at utc.fr>> napísal(a):
>>>>
>>>> Hello
>>>>
>>>> Which version of gcc did you download from
>>>> equation.com
>>>> <https://antispam.utc.fr/proxy/2/c3RlcGhhbmUubW90dGVsZXRAdXRjLmZy/antispam.utc.fr/proxy/2/c3RlcGhhbmUubW90dGVsZXRAdXRjLmZy/antispam.utc.fr/proxy/2/c3RlcGhhbmUubW90dGVsZXRAdXRjLmZy/antispam.utc.fr/proxy/1/c3RlcGhhbmUubW90dGVsZXRAdXRjLmZy/equation.com>
>>>> ?
>>>>
>>>> S.
>>>>
>>>> > Le 25 sept. 2019 à 21:01, kjubo
>>>> <kopac.jakub at gmail.com
>>>> <mailto:kopac.jakub at gmail.com>> a écrit :
>>>> >
>>>> > Dear all,
>>>> >
>>>> > I am trying to make a c code.
>>>> > I instaled mingw (from equation.com
>>>> <https://antispam.utc.fr/proxy/2/c3RlcGhhbmUubW90dGVsZXRAdXRjLmZy/antispam.utc.fr/proxy/2/c3RlcGhhbmUubW90dGVsZXRAdXRjLmZy/antispam.utc.fr/proxy/2/c3RlcGhhbmUubW90dGVsZXRAdXRjLmZy/antispam.utc.fr/proxy/1/c3RlcGhhbmUubW90dGVsZXRAdXRjLmZy/equation.com>)
>>>> and MinGw toolbox from ATOMS.
>>>> >
>>>> > When I try to use a example code from call help
>>>> page, I get following error:
>>>> > (full scilab console print)
>>>> >
>>>> >
>>>> > Generate a loader file
>>>> > Generate a Makefile
>>>> > Running the Makefile
>>>> > Compilation of fooc.obj
>>>> > Building shared library (be patient)
>>>> >
>>>> > ------------- Compile file fooc.c --------------
>>>> > !
>>>> >
>>>> > !
>>>> > x86_64-w64-mingw32-gcc.exe -c -DWIN32 -DSTRICT
>>>> -DFORDLL -D_MSC_VER
>>>> > -I"C:/NONINS~1/SCILAB~1.2/libs/MALLOC/includes"!
>>>> > -I"C:/NONINS~1/SCILAB~1.2/libs/f2c"
>>>> -I"C:/NONINS~1/SCILAB~1.2/libs/intl"
>>>> > -I"C:/NONINS~1/SCILAB~1.2/modules/core/i!
>>>> > ncludes"
>>>> -I"C:/NONINS~1/SCILAB~1.2/modules/api_scilab/includes"
>>>> > -I"C:/NONINS~1/SCILAB~1.2/modules/call_scilab/incl!
>>>> > udes"
>>>> -I"C:/NONINS~1/SCILAB~1.2/modules/output_stream/includes"
>>>> > -I"C:/NONINS~1/SCILAB~1.2/modules/jvm/includes" -I!
>>>> >
>>>> "C:/NONINS~1/SCILAB~1.2/modules/localization/includes"
>>>> >
>>>> -I"C:/NONINS~1/SCILAB~1.2/modules/dynamic_link/includes"
>>>> -I!
>>>> > "C:/NONINS~1/SCILAB~1.2/modules/mexlib/includes"
>>>> > -I"C:/NONINS~1/SCILAB~1.2/modules/time/includes"
>>>> -I"C:/NONINS~1/S!
>>>> > CILAB~1.2/modules/windows_tools/includes"
>>>> >
>>>> -I"C:/NONINS~1/SCILAB~1.2/modules/threads/includes"
>>>> -I"C:/NONINS~1/SCILA!
>>>> > B~1.2/modules/ast/includes/ast"
>>>> > -I"C:/NONINS~1/SCILAB~1.2/modules/ast/includes/exps"
>>>> > -I"C:/NONINS~1/SCILAB~1.2/mod!
>>>> > ules/ast/includes/operations"
>>>> > -I"C:/NONINS~1/SCILAB~1.2/modules/ast/includes/parse"
>>>> > -I"C:/NONINS~1/SCILAB~1.2/modu!
>>>> > les/ast/includes/symbol"
>>>> >
>>>> -I"C:/NONINS~1/SCILAB~1.2/modules/ast/includes/system_env"
>>>> > -I"C:/NONINS~1/SCILAB~1.2/modu!
>>>> > les/ast/includes/types"
>>>> >
>>>> -I"C:/NONINS~1/SCILAB~1.2/modules/ast/includes/analysis"
>>>> > -I"C:/NONINS~1/SCILAB~1.2/modules!
>>>> > /string/includes"
>>>> -I"C:/NONINS~1/SCILAB~1.2/modules/console/includes"
>>>> -m64
>>>> > -D__SCILAB_TOOLBOX__ -DNDEBUG fooc.c !
>>>> >
>>>> > !
>>>> > ------------- Link files --------------
>>>> > !
>>>> >
>>>> > !
>>>> > x86_64-w64-mingw32-g++.exe --shared fooc.o
>>>> -std=c++11 -L"c:\program
>>>> > files\gcc\x86_64-w64-mingw32\lib" -LC:\Users\j!
>>>> >
>>>> kopac\AppData\Roaming\Scilab\scilab-6.0.2\mingwlib_x64
>>>> -lgfortran -lblasplus
>>>> > -llibf2c -lcore -lcore_f -llapack -lo!
>>>> > utput_stream -ldynamic_link -linteger
>>>> -loptimization_f -llibjvm
>>>> > -lscilocalization -llinpack_f -lcall_scilab -ltime!
>>>> > -lapi_scilab -llibintl -last -lfileio -lio
>>>> -lstring -lthreads -lsciconsole
>>>> > -lscilab_windows -llibmex -o libfooc.!
>>>> > dll -Wl,--out-implib=libfooc.a
>>>> -Wl,--export-all-symbols
>>>> > -Wl,--enable-auto-import !
>>>> >
>>>> > !
>>>> >
>>>> C:\Users\jkopac\AppData\Roaming\Scilab\scilab-6.0.2\mingwlib_x64/liblibf2c.a:
>>>> > file not recognized: File format not!
>>>> > recognized
>>>> > !
>>>> >
>>>> > !
>>>> > collect2.exe: error: ld returned 1 exit status
>>>> > !
>>>> >
>>>> > !
>>>> > Makelib:127: recipe for target 'libfooc.dll' failed
>>>> > !
>>>> >
>>>> > !
>>>> > make: *** [libfooc.dll] Error 1
>>>> > !
>>>> > at line 25 of function dlwCompile (
>>>> >
>>>> C:\NONINS~1\SCILAB~1.2\contrib\mingw\010~1.5\macros\windows\dlwCompile.sci
>>>> > line 34 )
>>>> > at line 70 of function ilib_compile (
>>>> >
>>>> C:\NONINSTALL\scilab-6.0.2\modules\dynamic_link\macros\ilib_compile.sci
>>>> line
>>>> > 86 )
>>>> > at line 104 of function ilib_for_link (
>>>> >
>>>> C:\NONINSTALL\scilab-6.0.2\modules\dynamic_link\macros\ilib_for_link.sci
>>>> > line 118 )
>>>> > at line 18 of executed file
>>>> C:\Users\XXX\Documents\SciLab\c experiment\z
>>>> > helpu\test_help_call.sce
>>>> >
>>>> > ilib_compile: Error while executing Makelib
>>>> >
>>>> >
>>>> > Can anybody help, how to make it works?
>>>> > (SciLab 6.0.2 on Win 7 PRO, 64 bit)
>>>> >
>>>> > thanks!
>>>> >
>>>> > BR
>>>> > JK
>>>> >
>>>> >
>>>> >
>>>> > --
>>>> > Sent from:
>>>> https://antispam.utc.fr/proxy/1/c3RlcGhhbmUubW90dGVsZXRAdXRjLmZy/mailinglists.scilab.org/Scilab-users-Mailing-Lists-Archives-f2602246.html
>>>> <https://antispam.utc.fr/proxy/2/c3RlcGhhbmUubW90dGVsZXRAdXRjLmZy/antispam.utc.fr/proxy/2/c3RlcGhhbmUubW90dGVsZXRAdXRjLmZy/antispam.utc.fr/proxy/2/c3RlcGhhbmUubW90dGVsZXRAdXRjLmZy/antispam.utc.fr/proxy/2/c3RlcGhhbmUubW90dGVsZXRAdXRjLmZy/antispam.utc.fr/proxy/1/c3RlcGhhbmUubW90dGVsZXRAdXRjLmZy/mailinglists.scilab.org/Scilab-users-Mailing-Lists-Archives-f2602246.html>
>>>> > _______________________________________________
>>>> > users mailing list
>>>> > users at lists.scilab.org
>>>> <mailto:users at lists.scilab.org>
>>>> >
>>>> https://antispam.utc.fr/proxy/1/c3RlcGhhbmUubW90dGVsZXRAdXRjLmZy/lists.scilab.org/mailman/listinfo/users
>>>> <https://antispam.utc.fr/proxy/2/c3RlcGhhbmUubW90dGVsZXRAdXRjLmZy/antispam.utc.fr/proxy/2/c3RlcGhhbmUubW90dGVsZXRAdXRjLmZy/antispam.utc.fr/proxy/2/c3RlcGhhbmUubW90dGVsZXRAdXRjLmZy/antispam.utc.fr/proxy/2/c3RlcGhhbmUubW90dGVsZXRAdXRjLmZy/antispam.utc.fr/proxy/1/c3RlcGhhbmUubW90dGVsZXRAdXRjLmZy/lists.scilab.org/mailman/listinfo/users>
>>>>
>>>> _______________________________________________
>>>> users mailing list
>>>> users at lists.scilab.org <mailto:users at lists.scilab.org>
>>>> http://lists.scilab.org/mailman/listinfo/users
>>>> <https://antispam.utc.fr/proxy/2/c3RlcGhhbmUubW90dGVsZXRAdXRjLmZy/antispam.utc.fr/proxy/2/c3RlcGhhbmUubW90dGVsZXRAdXRjLmZy/antispam.utc.fr/proxy/2/c3RlcGhhbmUubW90dGVsZXRAdXRjLmZy/antispam.utc.fr/proxy/1/c3RlcGhhbmUubW90dGVsZXRAdXRjLmZy/lists.scilab.org/mailman/listinfo/users>
>>>>
>>>> _______________________________________________
>>>> users mailing list
>>>> users at lists.scilab.org <mailto:users at lists.scilab.org>
>>>> https://antispam.utc.fr/proxy/1/c3RlcGhhbmUubW90dGVsZXRAdXRjLmZy/lists.scilab.org/mailman/listinfo/users
>>>> <https://antispam.utc.fr/proxy/2/c3RlcGhhbmUubW90dGVsZXRAdXRjLmZy/antispam.utc.fr/proxy/2/c3RlcGhhbmUubW90dGVsZXRAdXRjLmZy/antispam.utc.fr/proxy/2/c3RlcGhhbmUubW90dGVsZXRAdXRjLmZy/antispam.utc.fr/proxy/1/c3RlcGhhbmUubW90dGVsZXRAdXRjLmZy/lists.scilab.org/mailman/listinfo/users>
>>> _______________________________________________
>>> users mailing list
>>> users at lists.scilab.org <mailto:users at lists.scilab.org>
>>> http://lists.scilab.org/mailman/listinfo/users
>>> <https://antispam.utc.fr/proxy/2/c3RlcGhhbmUubW90dGVsZXRAdXRjLmZy/antispam.utc.fr/proxy/2/c3RlcGhhbmUubW90dGVsZXRAdXRjLmZy/antispam.utc.fr/proxy/1/c3RlcGhhbmUubW90dGVsZXRAdXRjLmZy/lists.scilab.org/mailman/listinfo/users>
>>>
>>
>>
>> _______________________________________________
>> users mailing list
>> users at lists.scilab.org <mailto:users at lists.scilab.org>
>> http://lists.scilab.org/mailman/listinfo/users
>> <https://antispam.utc.fr/proxy/2/c3RlcGhhbmUubW90dGVsZXRAdXRjLmZy/antispam.utc.fr/proxy/1/c3RlcGhhbmUubW90dGVsZXRAdXRjLmZy/lists.scilab.org/mailman/listinfo/users>
>>
>> _______________________________________________
>> users mailing list
>> users at lists.scilab.org <mailto:users at lists.scilab.org>
>> https://antispam.utc.fr/proxy/1/c3RlcGhhbmUubW90dGVsZXRAdXRjLmZy/lists.scilab.org/mailman/listinfo/users
>> <https://antispam.utc.fr/proxy/2/c3RlcGhhbmUubW90dGVsZXRAdXRjLmZy/antispam.utc.fr/proxy/1/c3RlcGhhbmUubW90dGVsZXRAdXRjLmZy/lists.scilab.org/mailman/listinfo/users>
> _______________________________________________
> users mailing list
> users at lists.scilab.org <mailto:users at lists.scilab.org>
> http://lists.scilab.org/mailman/listinfo/users
> <https://antispam.utc.fr/proxy/1/c3RlcGhhbmUubW90dGVsZXRAdXRjLmZy/lists.scilab.org/mailman/listinfo/users>
>
>
> _______________________________________________
> users mailing list
> users at lists.scilab.org
> https://antispam.utc.fr/proxy/1/c3RlcGhhbmUubW90dGVsZXRAdXRjLmZy/lists.scilab.org/mailman/listinfo/users
--
Stéphane Mottelet
Ingénieur de recherche
EA 4297 Transformations Intégrées de la Matière Renouvelable
Département Génie des Procédés Industriels
Sorbonne Universités - Université de Technologie de Compiègne
CS 60319, 60203 Compiègne cedex
Tel : +33(0)344234688
http://www.utc.fr/~mottelet
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.scilab.org/pipermail/users/attachments/20190927/230337e1/attachment.htm>
More information about the users
mailing list