[Scilab-users] several problems with xcos scilab 6.1.0

[Clément David]

Hello Pierre,

This change was introduced 6 months ago and is coherent to the default scope window for a beginner. This is the default settings that apply only to any new schema, for any saved Xcos diagram the previous value should be preserved; if not please report a bug.

Note: while investigating your issue, I tested the Xcos preferences and it failed to set up a default final simulation time; this is a bug reported at http://bugzilla.scilab.org/show_bug.cgi?id=16336

Regards,

--
Clément

From: users <users-bounces at lists.scilab.org> On Behalf Of Perrichon
Sent: Tuesday, February 25, 2020 5:04 PM
To: 'Users mailing list for Scilab' <users at lists.scilab.org>
Subject: Re: [Scilab-users] several problems with xcos scilab 6.1.0

For Kaplan turbine time simulation is 600s at least. Why the default time is 30 s ? Please program it at + infinity  that is 10000000 s.


De : Perrichon <perrichon.pierre at wanadoo.fr<mailto:perrichon.pierre at wanadoo.fr>>
Envoyé : mardi 25 février 2020 16:57
À : 'Users mailing list for Scilab' <users at lists.scilab.org<mailto:users at lists.scilab.org>>
Objet : several problems with xcos scilab 6.1.0

Hello,
Even if it is minor, apparently somebody has decided to define the time simulation to 30 s by default. Why ? I don't know
Before, it was 1.0E05 s and I stop the simulation with the END box in my main scheme. (to avoid user to go on this menu and choose another solver, at least). (choose is Newton for me , so the default one)
So I've hundred shemes to see

And this is not the first surprise.

Others tests don't work anymore

I can do tests to correct that, but it was not foreseen.

I still believe to go on with 6.1.0 but keep aware because not so clear with xcos

Pierre P.



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.scilab.org/pipermail/users/attachments/20200225/7e458623/attachment.htm>